Sender: |
|
X-To: |
|
Date: |
Mon, 14 Jan 2013 10:55:04 -0600 |
Reply-To: |
|
Message-ID: |
|
Subject: |
|
From: |
|
X-cc: |
|
In-Reply-To: |
|
Content-Type: |
text/plain; charset="ISO-8859-1" |
MIME-Version: |
1.0 |
Parts/Attachments: |
|
|
I understand what you are saying, but in this situation people are
recommending moving the QFP144 farther AWAY from the mounting structure.
I can't find any guidance in my IPC documents that would suggest an
appropriate clearance from QFP leads to mounting hardware
Jack
On Mon, Jan 14, 2013 at 10:42 AM, Joyce Koo <[log in to unmask]> wrote:
> It depends. If your board is flexible somewhat and you do require drop
> test or random vib, and your support points (screw position) is far and in
> between... you might need to worry, not just assembly (flatness is not a
> issue as you say), but reliability.
>
> Joyce Koo
> Materials Researcher - Materials Interconnect Lab
> Research In Motion Limited
> Office: (519) 888-7465 79945
> Mobile: (226) 220-4760
>
> -----Original Message-----
> From: TechNet [mailto:[log in to unmask]] On Behalf Of Jack Olson
> Sent: Monday, January 14, 2013 11:36 AM
> To: [log in to unmask]
> Subject: [TN] Mounting Hardware to QFP Component Lead
>
> To the assembly professionals out there:
>
> Have you ever had reliability issues with mounting screws if they are near
> a Quad Flat-Pack? My 144 pin land pattern is pretty close (100mils) but we
> are mounting the board into a very flat structure (no bowing)
> I can't imagine the compression of the board material could affect
> gull-wing style lead connections (maybe BGA?) but I don't know...
>
> thanks,
> Jack
>
>
>
>
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
|
|
|