Are you trying to verify a specific cable or a process? Do you at least have a top view where the blades cut through the insulation? I would recommend both visual inspection and cross-section. With visual inspection, verify the wires are properly positioned, IDC blades are protruding through the insulation (in a uniform manner) and the connector clips are fully engaged. If you need to verify a particular cable non-destructively, try x-ray.
Best Regards,
Andy Giamis
Commscope
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Forrester, Michael
Sent: Tuesday, December 18, 2012 9:29 AM
To: [log in to unmask]
Subject: [TN] IDC Connector Inspection
Per IPC-620 6.2.2 Discrete Wire Termination-Position of Wire for IDC connectors, the conductor of the wire is to be completely in the connection slot of the connector. If you do NOT have an end view of the connection to verify the location of the conductor, how is the location of the conductor within the connector connection area verified? Perform some type of depth measurement from the top? Thank you in advance for your help.
Best Regards,
Michael Forrester
Staff Engineer
CSMTPE
Siemens Healthcare Diagnostics
101 Silvermine Rd.
Brookfield, CT 06804
PH: (203) 740-6452
This message and any attachments are solely for the use of intended recipients. The information contained herein may include trade secrets, protected health or personal information, privileged or otherwise confidential information. Unauthorized review, forwarding, printing, copying, distributing, or using such information is strictly prohibited and may be unlawful. If you are not an intended recipient, you are hereby notified that you received this email in error, and that any review, dissemination, distribution or copying of this email and any attachment is strictly prohibited. If you have received this email in error, please contact the sender and delete the message and any attachment from your system. Thank you for your cooperation
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] ______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
|
