Ron,

The photo got stripped.  It depends upon what class product you're building.  25% of the termination off the pad is generally OK for class 3, and the criteria lessens to 50% when producing class 1 or 2.

Leland

-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Ron Feyereisen
Sent: Monday, November 05, 2012 12:19 PM
To: [log in to unmask]
Subject: [TN] Is Skewed part IPC-610 Acceptable?

[MT198-215 SKEWED R95.JPG]

Your opinions will be very helpful and appreciated!

Thanks,

Ron Feyereisen

______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] ______________________________________________________________________

________________________________

“Confidentiality Notice:
This transmission (including any attachments) may contain confidential information belonging to the sender and is intended only for the use of the party or entity to which it is addressed. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution, retention or the taking of action in reliance on the contents of this transmission is strictly prohibited. If you have received this transmission in error, please immediately notify the sender and erase all information and attachments.”

______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] 
______________________________________________________________________