TECHNET Archives

October 2012

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
"Glidden, Kevin" <[log in to unmask]>
Reply To:
TechNet E-Mail Forum <[log in to unmask]>, Glidden, Kevin
Date:
Tue, 30 Oct 2012 14:16:14 +0000
Content-Type:
text/plain
Parts/Attachments:
text/plain (20 lines)
Hi everyone,

Hoping all 'Netters in the path of Sandy are safe and sound today.

I am looking for someone who can verify ImAg plating thickness in the range of 5 to 12 micro-inches applied over copper using XRF techniques.  The IPC-4553 specification indicates this might be more difficult to achieve for silver than for other finishes, and requires some specialized equipment and calibration methods.  I am looking to have this done on around 5 or 6 PCBs only.  Offline responses / quotes are OK.

As a follow up, is anyone out there using XRF or other measurement techniques to measure thickness of finish platings as part of PCB incoming inspection criteria?  If so, what equipment(s) are required and what would be the estimated investments?

We periodically see ImAg finish boards that show copper through on the second side after only one pass through SMT reflow.  We spec 5-12 micro-inches, but sometimes measurements have shown we are getting as little as 2 to 3.  I am wondering if it is warranted to sample incoming lots for verification.

Thanks,

Kevin Glidden


______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] 
______________________________________________________________________

ATOM RSS1 RSS2