Does your vendor provide (1) crimp tool? (2) acceptance criteria? If not, where you get your cable?
--------------------------
Sent using BlackBerry
----- Original Message -----
From: Julien Meyer [mailto:[log in to unmask]]
Sent: Tuesday, October 23, 2012 02:07 PM
To: [log in to unmask] <[log in to unmask]>
Subject: Re: [TN] Crimping requirements - coax cable
Hi Linda, thank you for your reply.
I had already looked into section 13 of IPC/WHMA-A-620, but there are only two crimp configurations - clamped ground ring and crimped ferrule - whereas my coax cable was crimped onto an open barrel crimp almost identical to that found in sect 5.1 of the IPC spec.
Hence my confusion: in the absence of specific requirements for coax cables mated to open barrel crimps, should a coax cable then be treated like a regular wire and follow the accept/reject criteria of 5.1.3?
Best regards,
Julien Meyer
Quality Assurance
Cobham Tactical Communications & Surveillance
T:+1 902 468 3007 ext. 3144
F:+1 902 798 8188
Please consider the environment before printing this email
This email and any attachments may contain EXPORT-CONTROLLED technical data that is subject to the International Traffic In Arms Regulations (ITAR), or the Export Administration Regulations (EAR). Export of this material is restricted by the Controlled Goods Regulations and may not be transferred by any means to a foreign person, outside the US or Canada, without prior written approval from International Trade Canada or the U.S. Government. If you are not the intended recipient of this email, please notify the sender immediately.
-----Original Message-----
From: Linda Langley [mailto:[log in to unmask]]
Sent: October 23, 2012 2:40 PM
To: TechNet E-Mail Forum; Julien Meyer
Subject: RE: Crimping requirements - coax cable
Julien,
Check out the IPC/WHMA-A-620, page 13-1, there is a whole section on Coaxial Cables.
Linda Langley CIT
Training Specialist
248.829.4697
fax 248.853.6698
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Julien Meyer
Sent: Tuesday, October 23, 2012 11:08 AM
To: [log in to unmask]
Subject: [TN] Crimping requirements - coax cable
Hi TechNetters,
Does anyone have experience with the IPC requirements for crimping coax cables?
We received a shipment of crimped coax cables where the conductor crimp was not fully closed. Therefore, a substantial section of braid was not captured by the conductor crimp.
If this were a regular wire, it would fail according to IPC for all product classes, but since it's a coax cable, I'm a little less certain.
I posted some pics here: https://plus.google.com/photos/104770679384262376856/albums/5802515956087514305?authkey=CPK-v7qT1MnrwQE
Could you advise?
Best,
Julien Meyer
Quality Assurance
Cobham Tactical Communications & Surveillance
T:+1 902 468 3007 ext. 3144
F:+1 902 798 8188
[log in to unmask]<mailto:[log in to unmask]>
Cobham Tracking & Locating Ltd. doing business as Cobham Tactical Communications & Surveillance, 120 Eileen Stubbs Avenue, Suite 200, Dartmouth, NS B3B 1Y1, Canada. www.cobham.com<http://www.cobham.com>
Registered office Eileen Stubbs Avenue, Suite 200, Dartmouth, NS B3B 1Y1, Canada
Please consider the environment before printing this email
This e-mail and any files transmitted with it ("E-mail") is intended solely for the addressee(s) and may contain confidential and/or legally privileged information. If you are not the addressee(s), any disclosure, reproduction, copying, distribution or other use of the E-mail is prohibited. If you have received this E-mail in error, please delete it and notify the sender immediately via our switchboard or return e-mail.
This email and any attachments may contain EXPORT-CONTROLLED technical data that is subject to the International Traffic In Arms Regulations (ITAR), or the Export Administration Regulations (EAR). Export of this material is restricted by the Controlled Goods Regulations and may not be transferred by any means to a foreign person, outside the US or Canada, without prior written approval from International Trade Canada or the U.S. Government. If you are not the intended recipient of this email, please notify the sender immediately.
This email was scanned by Postini, the leading provider in Managed Email Security. For more information visit www.groveis.com
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] ______________________________________________________________________
This email was scanned by Postini, the leading provider in Managed Email Security. For more information visit
www.groveis.com
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
---------------------------------------------------------------------
This transmission (including any attachments) may contain confidential information, privileged material (including material protected by the solicitor-client or other applicable privileges), or constitute non-public information. Any use of this information by anyone other than the intended recipient is prohibited. If you have received this transmission in error, please immediately reply to the sender and delete this information from your system. Use, dissemination, distribution, or reproduction of this transmission by unintended recipients is not authorized and may be unlawful.
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
|
