Subject: | |
From: | |
Reply To: | |
Date: | Mon, 8 Oct 2012 13:19:48 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Hi Phil - I know that some folks think its a hassle to reseal the bag
after removing a portion of a board group but I think it is a simple and
somewhat effective manner to deter water absorption by the remaining
boards. The optimum situation would be to reseal in a moisture proof bag
that inhibits interaction between the boards and air but even sealing up
any bag with a desiccant pack is a reasonable measure to create an storage
"envelope" that becomes static. The IPC-1601 document has some good
information that will be useful for your inquiry.
Dave Hillman
Rockwell Collins
[log in to unmask]
Phil Nutting <[log in to unmask]>
Sent by: TechNet <[log in to unmask]>
10/08/2012 12:45 PM
Please respond to
TechNet E-Mail Forum <[log in to unmask]>; Please respond to
Phil Nutting <[log in to unmask]>
To
<[log in to unmask]>
cc
Subject
[TN] board baking - thread continuation
Ok, you folks have been very helpful so far. Now I need to pump you for a
little more information, but let me set the stage a little.
We typically build boards in small batches (25 to 50 boards at a time) but
we may buy bare boards in a larger quantity. Historically we would slice
(or rip) open the sealed board package and remove the number needed for
the kit. The remainder would sit in the parts bin in the stockroom with
no special handling. Being in New England, summertime can get pretty
humid. I maintain that we should seal the boards for the kit (build here
or ship to a CM) and the leftover boards in a bag or pouch with a
desiccant. I did order IPC-1601 back in August, but it hasn't made it up
to my office yet.
To properly store the boards is there a preferred plastic bag and
desiccant I should use? I'm going to assume your basic grocery store
"Zip-lock" type bag is NOT the product to use. I would think there are
bags and desiccant that are specifically for this application.
Thanks in advance,
Phil Nutting
Design for Manufacturing Engineer
Kaiser Systems, Inc.
126 Sohier Road
Beverly, MA 01915
Phone: 978-922-9300 x1310
Fax: 978-922-8374
e-mail: [log in to unmask]<mailto:[log in to unmask]>
www.kaisersystems.com<http://www.kaisersystems.com>
www.linkedin.com/in/philnutting<http://www.linkedin.com/in/philnutting>
________________________________
Note: All the information contained in this e-mail and its attachments is
proprietary to Kaiser Systems, Inc. and it may not be reproduced without
the prior written permission of sender. If you have received this email in
error, please immediately return it to sender and delete the copy you
received.
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
|
|
|