Yes, sorry, I should have clarified from the beginning, it's not solderability that bothers me, the pins are all soldered. It's just that Cu diffuses in the active area.
Ioan Tempea, ing.
Ingénieur principal de fabrication / Senior Manufacturing Engineer
[signature002]<http://www.digico.cc/>
950 RUE BERGAR, LAVAL, QC, H7L 5A1<http://g.co/maps/2gh3f>
T+ 1 (450) 967-7100, EXT244
------------------------------------------------------------------------
[signature001] <http://www.facebook.com/pages/Digico/277076778479>
------------------------------------------------------------------------
Lauréat Dunamis 2012<http://digico.cc/dunamis-2012/>
Entreprise manufacturière / Gestion du capital humain
De : [log in to unmask] [mailto:[log in to unmask]]
Envoyé : October-23-12 9:07 AM
À : TechNet E-Mail Forum; Ioan Tempea
Objet : Re: [TN] Ni barrier thickness - Part II
Hi Ioan - there are numerous studies on how copper will diffuse thru gold. I recommend that you contact/google the connector fabricators as they would be an immediate source of published reports. The diffusion of copper thru the gold would also degrade the solderability of the pins so, at a minimum, you can use the IPC JSTD -002 conditioning recipe (155C bake for 4 hours) to get an initial measurement of degradation. Understanding what happens in the long term is not an easy assessment and dependent on the product use environment.
Dave Hillman
Rockwell Collins
[log in to unmask]<mailto:[log in to unmask]>
From: Ioan Tempea <[log in to unmask]<mailto:[log in to unmask]>>
To: <[log in to unmask]<mailto:[log in to unmask]>>
Date: 10/23/2012 07:43 AM
Subject: [TN] Ni barrier thickness - Part II
Sent by: TechNet <[log in to unmask]<mailto:[log in to unmask]>>
________________________________
Dear Technos,
I guess you had all already guessed where I'm trying to get at: I have Cu diffusion at the surface of the Au on some connecting pins and can't assess the effect on long term reliability.
So here comes the second question: are there any studies / rules of thumb that could say how much of the Au surface may be lost without any negative impact on the functionality? I definitely got the message that everything is application related, but just trying my luck...
Or, anybody has an idea how could I test the long term reliability in this situation?
Thanks,
Ioan Tempea, ing.
Ingénieur principal de fabrication / Senior Manufacturing Engineer
[signature002]<http://www.digico.cc/>
950 RUE BERGAR, LAVAL, QC, H7L 5A1<http://g.co/maps/2gh3f>
T+ 1 (450) 967-7100, EXT244
------------------------------------------------------------------------
[signature001] <http://www.facebook.com/pages/Digico/277076778479>
------------------------------------------------------------------------
Lauréat Dunamis 2012<http://digico.cc/dunamis-2012/>
Entreprise manufacturière / Gestion du capital humain
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]<mailto:[log in to unmask]>
______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
|