Bill,

Should be .0084 thick (6 X .0014)

Regards,
Thomas A. Carroll, CQA, CIT, FAA ODA Unit Member
Supplier Quality Engineer
Boeing Defense, Space and Security - East Region Supplier Quality
eFAX: 314-777-1845
Cell: 215-692-2463
Virtual Desk Phone Number: 314-545-2358
email: [log in to unmask]
 Go Green! Please do not print this e-mail unless necessary. 
NOTE: This communication may contain privileged or other confidential information. If you are not the intended recipient, or believe you have received this communication in error, please do not print, copy, retransmit, disseminate, or otherwise use the information. Also, please indicate to the sender that you have received this e-mail in error, and delete the copy you received. Thank you.
EXPORT COMPLIANCE STATEMENT: 
"The information contained herein is or may be controlled by the International Traffic in Arms Regulations (ITAR), 22 CFR 120-130, and may not be exported, or disclosed to a foreign person, whether in the United States or abroad, without prior U.S. Government written approval"

-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of William Noel
Sent: Wednesday, August 29, 2012 7:29 AM
To: [log in to unmask]
Subject: [TN] Copper thickness

Hello all - I am working with a drawing that calls out a copper thickness of "6 oz/um"  How thick is this in typical copper thickness terms? (1/2 oz = .0007 in,  1 oz = .0014, etc)

______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] 
______________________________________________________________________