I would suggest 4-8 uinches.
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Joyce Koo
Sent: Tuesday, August 14, 2012 3:40 PM
To: [log in to unmask]
Subject: Re: [TN] PCB finish: ENIG vs. hard gold
If you go for what ever the gold, keep it thin (8-10 micro inches). Save your money and headache.
Joyce Koo
Materials Researcher - Materials Interconnect Lab Research In Motion Limited
Office: (519) 888-7465 79945
Mobile: (226) 220-4760
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Chuck Brummer
Sent: Tuesday, August 14, 2012 4:30 PM
To: [log in to unmask]
Subject: Re: [TN] PCB finish: ENIG vs. hard gold
Kevin,
Make sure you require a Ni barrier layer between the copper and gold (hard of soft)!
Chuck
Charles W. Brummer | 3M Manufacturing Engineer 3M Electronic Solutions Division 3M Canoga Park, 8357 Canoga Ave. | Canoga Park, CA 91304
Office: 818 734 4930
[log in to unmask] | www.3M.com
This message (including any attachments) may contain material, non-public information or proprietary information and is for the intended recipients only. If you are not the intended recipient, you should notify the sender and delete this message. Any disclosure, copying, or use of this information is strictly prohibited and may subject you to legal liability.
From: "Glidden, Kevin" <[log in to unmask]>
To: <[log in to unmask]>
Date: 08/14/2012 09:15 AM
Subject: [TN] PCB finish: ENIG vs. hard gold
Sent by: TechNet <[log in to unmask]>
Hi everyone,
We have a PCB supplier who is offering "Hard Gold" as an alternate to ENIG finish, due to PCB size and processing capabilities. The application is Class 3 (mil/aero). The circuit is thin FR4 and subject to SMT reflow w/
Sn63Pb37 (non RoHS) solder alloy, and moderate flexing in end application.
Can anyone offer info on the differences between the two finishes, and/or their suitability? Is there an IPC spec (or specs) that outline "hard gold"?
Thanks,
Kevin Glidden
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] ______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
---------------------------------------------------------------------
This transmission (including any attachments) may contain confidential information, privileged material (including material protected by the solicitor-client or other applicable privileges), or constitute non-public information. Any use of this information by anyone other than the intended recipient is prohibited. If you have received this transmission in error, please immediately reply to the sender and delete this information from your system. Use, dissemination, distribution, or reproduction of this transmission by unintended recipients is not authorized and may be unlawful.
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
|