Hi Richard,

Thanks a lot.  I will check out these materials.


Regards
Ravinder Ajmani
HGST, a Western Digital company
[log in to unmask]
 

5601 Great Oaks Pkwy. 
San Jose, CA 95119-1003
www.hgst.com




"Stadem, Richard D." <[log in to unmask]> 
Sent by: TechNet <[log in to unmask]>
07/19/2012 06:54 PM
Please respond to
TechNet E-Mail Forum <[log in to unmask]>; Please respond to
"Stadem, Richard D."    <[log in to unmask]>


To
<[log in to unmask]>
cc

Subject
Re: [TN] Low Loss PCB Material






Hi, Ravinder
You might want to look at the following:
Nelco N4000-13EP
Panasonic Megtron Getek
Taconic RF-35TC or RF35A2

I know these are all RF-tailored, but not sure if all are halogen free. I 
know the Taconic materials are.
You would need to check with them about the UL approval rating. 

________________________________________
From: TechNet [[log in to unmask]] On Behalf Of [log in to unmask] 
[[log in to unmask]]
Sent: Thursday, July 19, 2012 8:10 PM
To: [log in to unmask]
Subject: [TN] Low Loss PCB Material

Hi All,

We discussed with our quick-turn fab the use of low-loss PCB materials for
high-speed applications.  As per the discussions,the only such material
that is Halogen-Free and has UL Approval seems to be Rogers Theta
material.  If there are other materials available in US and more
importantly at the high-volume fabs off-shore then please share the
information.  I will really appreciate it.

Thanks.


Regards
Ravinder Ajmani
HGST, a Western Digital company
[log in to unmask]


5601 Great Oaks Pkwy.
San Jose, CA 95119-1003
www.hgst.com


______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________

______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] 
______________________________________________________________________



______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] 
______________________________________________________________________