Subject: | |
From: | |
Reply To: | |
Date: | Tue, 10 Jul 2012 13:40:25 +0000 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
So you're saying their soldering skills leave a yacht to be desired. You should compile and post these techtips and call them charticles.
Dewey
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Graham Collins
Sent: Tuesday, July 10, 2012 3:27 AM
To: [log in to unmask]
Subject: Re: [TN] Crimp/Solder Lugs for DLO 535 MCM Cable
Excellent article! In the sailboat world the myth of soldering crimped
connections is healthy and thriving, it drives me nuts. But that is
what you get with a large DIY crowd and some dockside "experts"...
Thanks Steve.
regards,
- Graham
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Steve Gregory
Sent: Monday, July 09, 2012 7:47 PM
To: [log in to unmask]
Subject: Re: [TN] Crimp/Solder Lugs for DLO 535 MCM Cable
John,
After looking around a bit, you really shouldn't solder a crimped
connection, you could very well be compromising the crimp itself, and
cause more problems than if you just left the crimp alone (assuming it
was a proper crimp to begin with). Here's a article from Jim Dunbar a
Product Manager for Terminals and Splices, and Senior Product Engineer
Tom Michielutti of Tyco that spells it out:
http://www.newark.com/pdfs/techarticles/tyco/ET.pdf
Look down at the bottom of page 4...
Steve
-----Original Message-----
From: Steve Gregory
Sent: Monday, July 09, 2012 6:01 PM
To: [log in to unmask]
Subject: Re: [TN] Crimp/Solder Lugs for DLO 535 MCM Cable
John,
I always thought that you didn't solder a crimped connection. But if
this is a requirement, then probably the best way to go about this is to
get yourself an American Beauty...
An American Beauty Resistance soldering unit that is, a model 10577
ought to do the trick:
https://www.americanbeautytools.com/site/models/rs/109/features
There's even a Youtube video of it in action:
https://www.youtube.com/watch?v=h7vNQki7UgQ&feature=relmfu
Steve
-----Original Message-----
From: John Anselmo
Sent: Monday, July 09, 2012 4:36 PM
To: [log in to unmask]
Subject: [TN] Crimp/Solder Lugs for DLO 535 MCM Cable
Ok, we need to solder the lugs (after crimping) for a 535MCM DLO Cable.
What's the easiest way to do this?
Thanks,
John
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud
service.
For more information please contact helpdesk at x2960 or
[log in to unmask]
______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud
service.
For more information please contact helpdesk at x2960 or
[log in to unmask]
______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud
service.
For more information please contact helpdesk at x2960 or
[log in to unmask]
______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
|
|
|