TECHNET Archives

June 2012

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Reuven Rokah <[log in to unmask]>
Reply To:
TechNet E-Mail Forum <[log in to unmask]>, Reuven Rokah <[log in to unmask]>
Date:
Fri, 29 Jun 2012 00:00:40 +0300
Content-Type:
text/plain
Parts/Attachments:
text/plain (51 lines)
Press fit with ENIG is problematic because of the Nickel hardness /
cracking risk.

On Thu, Jun 28, 2012 at 9:13 PM, Victor Hernandez <
[log in to unmask]> wrote:

> Fellow TechNetters:
>
>   Are the pins in connector designated for Press Fit Pins gold plated for
> insertion into an ENIG raw board.   What is the acceptable process.   If
> both interfaces are gold plated with a thin layer of gold, the thin layer
> of gold would be wiped off during the insertion process.   Then you would
> have a nickel to nickel mating surface.   Does this sound correct.   The
> interface should form a tight air seal.
>
> Victor,
>
> ______________________________________________________________________
> This email has been scanned by the Symantec Email Security.cloud service.
> For more information please contact helpdesk at x2960 or [log in to unmask]
> ______________________________________________________________________
>



-- 

Best Regards,

*Reuven Rokah*

Mobile: 972-52-6012018
Tel:        972-3-9360688
Fax:          076-5100674
 <http://www.rokah-technologies.com/>[log in to unmask]
[log in to unmask]
www.rokah-technologies.com

**
This e-mail message is intended for the recipient only and contains
information which is CONFIDENTIAL and which may be proprietary of Rokah
Technologies. If you have received this transmission in error, please
inform me by e-mail, phone or fax, and then please delete all of the
original files and all other copies exist.


______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] 
______________________________________________________________________

ATOM RSS1 RSS2