Sender: |
|
X-To: |
|
Date: |
Fri, 18 May 2012 10:58:58 -0700 |
Reply-To: |
|
Message-ID: |
|
Subject: |
|
From: |
|
Content-Transfer-Encoding: |
7bit |
In-Reply-To: |
|
Content-Type: |
text/plain; charset="us-ascii" |
MIME-Version: |
1.0 |
Parts/Attachments: |
|
|
Mentor PADS Layout - 22 years
Never ran across a design I couldn't do.
30+ layers
Blind & buried vias
Matched Length (Shielded too)
Diff Pairs
Interactive Route Editing
Great library tools
RF
I can go on & on but you get the idea.
The only downside is that many EE engineers use OrCAD Capture with PADS and
they're not compatible. But you can translate OrCAD to PADS Logic.
Altium beats PADS on the schematic integration and 3D Modeling; however I
have never had a customer request for true 3D modeling, just IDF export.
Tom
Tom Hausherr
President
PCB Libraries, Inc.
13730 Sorbonne Court
San Diego, CA 92128
858.592.4826 Office
858.859.5371 Cell
[log in to unmask]
-----Original Message-----
From: DesignerCouncil [mailto:[log in to unmask]] On Behalf Of Brooks,
Bill
Sent: Friday, May 18, 2012 10:52 AM
To: [log in to unmask]
Subject: [DC] What CAD tools do you use?
What CAD tools do you use?
Bill Brooks | Datron World Communications, Inc.
PCB Designer/Engineer | Office: 760-602-7004| Fax: 760-597-3777 |
[log in to unmask]
3055 Enterprise Court, Vista, CA 92081 | www.dtwc.com
Performance You Require. Value You ExpectTM
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
---------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV 16.0.
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To temporarily stop/(restart) delivery of DesignerCouncil send: SET DesignerCouncil NOMAIL/(MAIL)
For additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
---------------------------------------------------------------------------------
|
|
|