Subject: | |
From: | |
Reply To: | |
Date: | Thu, 5 Apr 2012 14:24:27 +0000 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Richard, the liquidus temperature is the maximum temperature at which solid crystals can co-exist with liquid. Above the liquidus the material is completely liquid. The solidus temperature is in contrast the temperature below which liquid can't exist. In terms of a tin/lead phase diagram it is the upper boundary of the liquid+solid "mushy" region
Regards
Ian
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Stadem, Richard D.
Sent: 05 April 2012 14:32
To: [log in to unmask]
Subject: Re: [TN] Max time above liquidus
You mean time above solidus. Time above liquidus is vapor.
Yes, 105 degrees in liquidus does seem excessive, but it depends on the size/mass of the CCA being soldered. It might be required for very large CCAs.
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Fabien Guizelin
Sent: Wednesday, April 04, 2012 6:04 PM
To: [log in to unmask]
Subject: [TN] Max time above liquidus
Hi,
Should I be concerned by excessive TAL ? (inter-metalic, etc)
Do you consider 105sec TAL with a Indium 5.1 paste excessive ? (Indium recommends 45-60sec)
Thanks,
Fabien
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] ______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] ______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
______________________________________________________________________
Aero Engine Controls is a trading name of Rolls-Royce Goodrich Engine Control Systems Limited, Registered office Moor Lane Derby DE24 8BJ Registered number 6686268, registered in England
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
|
|
|