Subject: | |
From: | |
Reply To: | |
Date: | Thu, 5 Apr 2012 07:08:37 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Our board houses tell us to use +.08mm, -0.00mm.
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Kuczynski, Michael (H USA)
Sent: Wednesday, April 04, 2012 7:16 PM
To: [log in to unmask]
Subject: [TN] Tooling hole tolerance
All - I'm looking for supporting documentation for;
the typical tooling hole to tooling hole tolerance.
I've gone thru IPC-222, 2615, 610 and even defunct D-275 with no luck.
Typically I specify +/- 0.003in (or 0.076mm) and sometimes +/-0.002in
Any help would be appreciated.
SIEMENS
Michael Kuczynski Healthcare Diagnostics Inc.
Product Eng. II CID 511 Benedict Ave.
914-524-3118 (Ph) Tarrytown, NY 10591
914-524-3322 (Fax) Mail Stop P25-1-C
[log in to unmask]
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
|
|
|