William,

Can you be more specific about your needs/troubles?  We design and build many different high voltage boards for our high voltage power supply products with typical outputs between 160 and 180kV (submerged in oil) and we have been successful at 40 to 100kV in air.


Phil Nutting
Design for Manufacturing Engineer
Kaiser Systems, Inc.
126 Sohier Road
Beverly, MA 01915
Phone: 978-922-9300 x1310
Fax: 978-922-8374
e-mail: [log in to unmask]
www.kaisersystems.com
www.linkedin.com/in/philnutting



-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of William Noel
Sent: Tuesday, March 27, 2012 6:10 PM
To: [log in to unmask]
Subject: [TN] Hi Voltage Board Design

Hello all - Is anyone aware of a good training program that addresses design of high voltage pcb's?  I'm a little out of my comfort zone with regard to hi-voltage spikes, switching and the subsequent affect on other areas of the board.  Thanks in advance for any advice.


Note: All the information contained in this e-mail and its attachments is proprietary to Kaiser Systems, Inc. and it may not be reproduced without the prior written permission of sender.  If you have received this email in error, please immediately return it to sender and delete the copy you received.


______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] 
______________________________________________________________________