Hi Doug
Already done. Steve, do please feel free to post it as Doug suggests.
Graham
On 17 Jan 2012, at 13:48, Douglas Pauls wrote:
> Perhaps Graham, if you can provide the document to Steve Gregory to post,
> or post it on the Gen3 web site, it would be a convenient place for many
> to get the document you reference.
>
> Doug Pauls
>
>
>
> Graham Naisbitt <[log in to unmask]>
> Sent by: TechNet <[log in to unmask]>
> 01/17/2012 06:03 AM
> Please respond to
> TechNet E-Mail Forum <[log in to unmask]>; Please respond to
> Graham Naisbitt <[log in to unmask]>
>
>
> To
> <[log in to unmask]>
> cc
>
> Subject
> Re: [TN] Expired Solder Paste
>
>
>
>
>
>
> Hi Juliano and fellow Techies,
>
> It might be useful to you to consider using a relatively new Process
> Control Standard available from SMART Group (www.smartgroup.org) entitled:
> Control of Solder Paste used in Electronic Assembly Process
> This was developed from the IPC-J-STD005 solder paste test methods, but
> adapted for use by folks using paste as opposed to the manufacturer.
>
> The Scope states:
> This Standard is intended to determine the suitability of solder paste
> prior to its employment on the production line; reduce process defects and
> minimise rework.
> The tests are, by necessity, fast and simple to perform; with commercially
> available equipment and may be completed in less than 1 hour.
> A list of defects, test methods and the time/cost implications are shown
>
> If anyone would like a copy they could contact SMART Group or let me know
> and I can forward a copy.
>
> Graham Naisbitt
> Gen3 Systems Limited
> www.gen3systems.com
> [log in to unmask]
> On 16 Jan 2012, at 13:29, Juliano Pacheco wrote:
>
>
>> Hi,
>>
>> What are the consequences of using expired solder paste?
>> How long after the expired date is "acceptable"?
>>
>> Thank you.
>>
>> Juliano Pacheco
>>
>>
>> ______________________________________________________________________
>> This email has been scanned by the Symantec Email Security.cloud
> service.
>> For more information please contact helpdesk at x2960 or
> [log in to unmask]
>> ______________________________________________________________________
>>
>> ---------------------------------------------------
>> Technet Mail List provided as a service by IPC using LISTSERV 16.0
>> To unsubscribe, send a message to [log in to unmask] with following text
> in
>> the BODY (NOT the subject field): SIGNOFF Technet
>> To temporarily halt or (re-start) delivery of Technet send e-mail to
> [log in to unmask]: SET Technet NOMAIL or (MAIL)
>> To receive ONE mailing per day of all the posts: send e-mail to
> [log in to unmask]: SET Technet Digest
>> Search the archives of previous posts at:
> http://listserv.ipc.org/archives
>> For additional information, or contact Keach Sasamori at [log in to unmask]
> or 847-615-7100 ext.2815
>> -----------------------------------------------------
>
>
> ______________________________________________________________________
> This email has been scanned by the Symantec Email Security.cloud service.
> For more information please contact helpdesk at x2960 or [log in to unmask]
> ______________________________________________________________________
>
> ---------------------------------------------------
> Technet Mail List provided as a service by IPC using LISTSERV 16.0
> To unsubscribe, send a message to [log in to unmask] with following text in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt or (re-start) delivery of Technet send e-mail to
> [log in to unmask]: SET Technet NOMAIL or (MAIL)
> To receive ONE mailing per day of all the posts: send e-mail to
> [log in to unmask]: SET Technet Digest
> Search the archives of previous posts at: http://listserv.ipc.org/archives
> For additional information, or contact Keach Sasamori at [log in to unmask] or
> 847-615-7100 ext.2815
> -----------------------------------------------------
>
>
>
> ______________________________________________________________________
> This email has been scanned by the Symantec Email Security.cloud service.
> For more information please contact helpdesk at x2960 or [log in to unmask]
> ______________________________________________________________________
>
> ---------------------------------------------------
> Technet Mail List provided as a service by IPC using LISTSERV 16.0
> To unsubscribe, send a message to [log in to unmask] with following text in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
> To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
> Search the archives of previous posts at: http://listserv.ipc.org/archives
> For additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
> -----------------------------------------------------
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 16.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
For additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
