Subject: | |
From: | |
Reply To: | |
Date: | Thu, 10 Nov 2011 12:57:04 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Hello Technetters, I would like to request your help regarding step stencils; I never worked before with these of stencil so all recommendations would be really appreciated. We have a step-up stencil that has 3 thicknesses: 8, 6 and 5 mils. Most of the stencil is at 6 mils and there are some areas that are at 8 and at 5 mils. The problem that we have is that the paste thickness that we obtain on the 5 and 6 mils areas is around 8 mils… The stencil has step-down from 8 to 6 mils and from 6 to 5 mils . Here are my questions:
1) Which keep-out out distance we should have. is the rule of thumb of IPC-7525 correct ( 35 mils for each 1 mil step thickness)?.
2) Which type of stencil is recommended , electroform?
3) Do we need a special type of squeegee blades?
4) Presently we use step-up stencil, should we use step-down stencil?
Thank you
Dominic Boudreau
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 16.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
For additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
|
|