It is wickedly obvious; he has too much time on his hands.
Dewey
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Guy Ramsey
Sent: Wednesday, November 30, 2011 2:24 PM
To: [log in to unmask]
Subject: Re: [TN] NTC Friday Element Quiz - the Question
You can't make this stuff up!
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Douglas Pauls
Sent: Wednesday, November 30, 2011 8:05 AM
To: [log in to unmask]
Subject: Re: [TN] NTC Friday Element Quiz - the Question
I want you all to notice that it is always Hillman that pitches the first
grenade.
Now I feel motivated to explain / expose the dirty secrets Dave is hiding.
The Collins clock Dave refers to is an old Mickey Mouse windup clock from
decades ago with a picture of Art Collins laminated to the tummy. Sits
right over his computer. He has a candle on top of it and that is his
"firewall". The only time the "firewall" becomes a stamp of any kind is
when Dave, using the classic neanderthal two finger hunt and peck typing,
bangs so hard on the keyboard that it knocks the candle off, stamping a
wide area in hot wax. Kinda fun to hear the sudden yell though.
Doug Pauls
"David D. Hillman" <[log in to unmask]>
Sent by: TechNet <[log in to unmask]>
11/29/2011 03:44 PM
Please respond to
TechNet E-Mail Forum <[log in to unmask]>; Please respond to
<[log in to unmask]>
To
<[log in to unmask]>
cc
Subject
Re: [TN] NTC Friday Element Quiz - the Question
Hi Patrick - yes, per the Technet time stamp however, I use the Rockwell
Collins firewall time stamp which had you a few second behind Dock. Sorry,
I had to pick a "clock" when we first started this fun and I selected the
Collins clock for no specific reason. There will be a new quiz this week
so you'll have another shot at getting the guys for assistance.
Wait a second, I think I'll blame Doug - yes, it is his fault that we are
using the Collins clock!
Dave
"Goodyear, Patrick" <[log in to unmask]>
11/29/2011 12:32 PM
To
"'TechNet E-Mail Forum'" <[log in to unmask]>,
"[log in to unmask]" <[log in to unmask]>
cc
Subject
RE: [TN] NTC Friday Element Quiz - the Question
Hey I beat Dock by 3 seconds.
p
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of David D. Hillman
Sent: Thursday, November 17, 2011 3:36 PM
To: [log in to unmask]
Subject: [TN] NTC Friday Element Quiz - the Question
Hi folks - Here is the Friday Element Quiz Question:
The Question:
The longest lived isotope of this element is a half life of 21 seconds.
This element was produced by bombarding a target of Lead-207 and Lead-208
with Chromium-54. This element was also produced by bombarding
Californium-249 with Oxygen-18. This element was reported to be
discovered in June 1974 by two different research groups. It was 1997
before the official name of this element was finally resolved. What
element is being described?
The winner of the weekly element quiz will get the services of Clumpy and
Kloumpios for a week. There will be no quiz next week as Clumpy and
Kloumpios are going to Costa Rica with me for a whitewater kayaking trip -
I need someone to carry the boat and paddling gear!
So far Clumpy and Kloumpios have:
Week 1 Lamar Young, SCS Coatings
- accomplished nothing (drank lots of coffee)
Week 2 Bev Christian, RIM
- conducted REACH material testing
Week 3 Drew Meyer, Benchmark Electronics Inc.
- Solderability testing and mowed the lawn
Week 4 Ian Fox, Goodrich
- had an epic journey of travel
Week 4 Gary Ferrari, Garrick Global
- unknown
Week 5 Fredrick Miller, Astrolab
- unknown
Week 6 David Nelson, Raytheon
- Were tackling dummys for Dallas Cowboys
Week 7 Graham Collins, L3 Communications
- Cleaned gutters and painted window trim
Week 8 Bill Noel, ITT Geospatial Systems Division
- unknown
Week 9 Steve Gregory of RD Circuits
- unknown
Week 10 David Bealer of Watchfire Signs
- descaled the in-line wash machine! Ouch!
Week 11 Dick Krug of Sparton Corporation
- assisted with AS9100 quality management systems requirements audit
Week 12 Steve Creswick of Balanced Enterprise Solutions
- Acted as Steve's "go fer" due to a broken leg!
Week 13 Gebhard Neifer, Delphi
- conducted a plasma pre treatment Taguchi DOE for a sealing process
Week 14 Bev Christian, RIM
- assisted with a tin pest investigation/test
Week 15 Bev Christian, RIM
- assisted Bev shoveling snow
Week 16 David Bealer of Watchfire Signs
- assisted with reflow profiling
Week 17 Brian Ellis, rumored to be retired
- assisted with rewiring the house, had a tractor accident and found his
cousin Kloumpios
Week 18 Denny Fritz, SAIC
- assisted with tin whisker inspection/examinations
Week 19 Graham Collins, L3 Communications
- assisted with scraping barnacles, boat paint and boat engine maintenance
Week 20 Mark Woolley, PTRL Laboratory Avaya
- assisted with weather observations (70F to snow) and resolving
electrochemical migration failures
Week 20 Tom Carroll, Boeing Defense, Space and Security
- assisted with commercial aircraft galley inspection
Week 21 Brian Ellis, supposedly retired, and Tom Carroll, Boeing Defense,
Space and Security
- assisted with root cause corrective action tasks
- assisted with nothing but catching up with the family
Week 22 Drew Meyer, Benchmark Electronics Inc.
- assisted with metallographic cross-sections and Dye & Pry testing
Week 23 Bev Christian, RIM
- assisted with a creep corrosion project and the setting up of an oxygen
bomb
Week 24 Steve Gregory, RD Circuits
- unknown
Week 25 Ahne Oosterhof, A-Laser
- assisted with stencil aperture data analysis and split/stacked firewood
Week 26 Scott Post, Delphi
- assisted/participated in the Kokomo Airshow Race Event
Week 27 Brian Ellis, supposedly retired
- assisted with tedious website work and family home cooking
Week 28 Nigel Burtt
- abandoned Nigel and were rumored to be involved in UK News Corps/News
International cellphone/journalism/politics scandal
Week 29 Richard Stadem,GD-AIS
- unknown
Week 30 Robert Wolfe, Kimchuk Inc and Graham Naisbitt, Gen3
- assisted with a hot tub refurbishment for post work day de-stressing
- assisted with SIR and Cleanliness testing
Week 31 Bev Christian, RIM Inc, and Denny Fritz, SAIC
- assisted with lab testing
- assisted with tin whisker investigations
Week 32 Steve Mikell, supposedly retired
- attempted to provide both US Congress and EU lawmakers "engineered"
solutions
Week 33 Mark Woolley, PTRL Laboratory Avaya
- unknown
Week 34 Leland Woodall, CSTech Inc.
- assisted with new model qualifications,updating supporting
documentation, strain gaging, performing cross sections, verifying a new
selective soldering process, and finally assisted with the development of
a plant-wide countermeasure effectiveness auditing program (Wow, they had
to work hard this week!)
Week 35 Joe Russeau, Precision Analytical Laboratories
- assisted with new equipment preparations
Week 36 Patrick Goodyear, PGE
- assisted with beach trash collection duty
Week 37 Dave Elder, Tait Radio Communications
- assisted Dave Hillman with a geography lesson, watch USA vs Irland in
World Rugby Cup and went skiing.
Week 38 Steve Mikell, supposedly retired
- assisted with ????
Week 39 Andy Giamis, Commscope
- assisted with metallographic cross-sectional analysis of die cast Mg and
taught a group of Cub Scouts how to hotwire a tractor
Week 40 Gebhard Neifer, Delphi
- assisted with a customer audit
Week 41 Ian Fox, Aero Engine Controls
- assisted with pcb cross-section analysis
Week 42 Andy Giamis, Commscope
- Andy gave them the week off (BBQ and English ale party)
Week 43: 4 winners
Bev Christian, RIM
- assisted with testing of phthalates
Leland Woodall, CSTech Inc.
- assisted with installing a new fuel pump on the tractor, mowing my yard
and raking the leaves/pine needles.
Patrick Goodyear, PGE
- assisted with relaxing on the beach following kelp removal efforts
Richard Stadem,GD-AIS
- assisted with the qualification of a Radon-fueled Airvac PCBRM 5.2 with
its new 50,000 watt pre-heater and Radon emitting laser reflow head
Week 44 Patrick Goodyear, PGE
- assisted with sifting sand at the beach looking for sand dollars
Week 45 ???, ????
- assisted with ??????
Everyone have a safe week.
Dave Hillman
Rockwell Collins
[log in to unmask]
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 16.0 To
unsubscribe, send a message to [log in to unmask] with following text in the
BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or
(re-start) delivery of Technet send e-mail to [log in to unmask]: SET
Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the posts:
send e-mail to [log in to unmask]: SET Technet Digest Search the archives of
previous posts at: http://listserv.ipc.org/archives For additional
information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100
ext.2815
-----------------------------------------------------
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 16.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
For additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 16.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
For additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 16.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
For additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 16.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
For additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|