TECHNET Archives

September 2011

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
"Stadem, Richard D." <[log in to unmask]>
Reply To:
TechNet E-Mail Forum <[log in to unmask]>, Stadem, Richard D.
Date:
Thu, 29 Sep 2011 11:24:30 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (279 lines)
Boy, Doug. You nailed that one. I totally agree. I also want to point out that very few people read the IPC handbooks such as IPC-HDBK-001, which clearly explains the INTENTION of J-STD-001 and clarifies the standards.
It should be required reading for every process engineer and every quality engineer, whether OEM, CEM, customer, or otherwise. This would greatly reduce much of the misuse, misunderstanding, and misapplication.

Hang a copy from the toilet paper holder.

-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Douglas Pauls
Sent: Thursday, September 29, 2011 11:14 AM
To: [log in to unmask]
Subject: Re: [TN] OT RE: [TN] DFM Guidelines v/s IPC Guidelines

Ohhhhhhhh, I dunno.

Without a doubt, specifications are misused, misunderstood, misapplied, 
etc.  The laws of supply and demand do not apply to the foolish - we have 
a far greater supply of fools than we have demand for.

BUT, ya gotta start somewhere.  I am in the position here at Rockwell of 
training hordes of new engineers on cleaning processes, chemicals, 
conformal coatings, etc.  The specifications are a teaching tool and a 
starting point.  Here, go read this specification and then lets sit down 
and discuss what is right and wrong about it and what it means to Rockwell 
Collins and the Aerospace Industry.

When the ignorant individuals are on the customer's side of the fence, 
then it is a teaching opportunity.  The answer is not abolish consensus 
documents, the answer is patient education and better training.  I can say 
from experience that it helps my case tremendously when I can show that we 
are in leadership positions in the IPC committees.  Aids tremendously in 
listening.

Doug Pauls



"Robert Kondner" <[log in to unmask]> 
09/29/2011 10:53 AM
Please respond to
<[log in to unmask]>


To
"'TechNet E-Mail Forum'" <[log in to unmask]>, <[log in to unmask]>
cc

Subject
RE: [TN] OT RE: [TN] DFM Guidelines v/s IPC Guidelines






Doug,

  The spreading of information is a plus in my book, I am a big fan of IPC
docs for that. And I tip my hat towards anyone who pulls together a good
process analysis. 

 But more often "Consensus Documents" are used as a "Specifications" by
hordes of poorly trained "Technical Experts". Some of the nonsense about
paste expiration dates, final rinse in DI water and other are perfect
examples.

 Without a doubt there is much each of us needs to learn, and there are 
many
issues in a manufacturing process. But a "Consensus Document" leads too 
many
to stop thinking and stop learning. The result is the bitter reward. 

Bob K.

-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Douglas Pauls
Sent: Thursday, September 29, 2011 11:37 AM
To: [log in to unmask]
Subject: Re: [TN] OT RE: [TN] DFM Guidelines v/s IPC Guidelines

Ohhhhhh I dunno.

Bob, while there are down sides to consensus documents, they are pretty 
darn
good when you consider the alternatives and provide a common ground that
make "exceptions" easier to do.  I know I would much rather say, use
workmanship per IPC-A-610, except for A, B, C. Rather than write a 
complete
document, which I have done.  Taint easy.

Doug Pauls



"Robert Kondner" <[log in to unmask]>
09/29/2011 10:23 AM
Please respond to
<[log in to unmask]>


To
"'TechNet E-Mail Forum'" <[log in to unmask]>, <[log in to unmask]>
cc

Subject
OT RE: [TN] DFM Guidelines v/s IPC Guidelines






Consensus Documents. I abhor that concept. (Yes, I know, the EU seems to
love them .)

Hmmmm, think about this:

                 How Governments Make Laws:

                 Price Fixing

                 Social Mandates

                 Molotov-Ribbentrop Pact

Bob K. 

 



-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Douglas Pauls
Sent: Thursday, September 29, 2011 11:13 AM
To: [log in to unmask]
Subject: Re: [TN] DFM Guidelines v/s IPC Guidelines

Prashant,
Keep in mind that IPC documents are consensus documents.  What may be good
as a general guideline may not be adequate for niche applications or for
various industry segments.  We have the same issue with the IPC-A-610. 
Excellent as a base document but does not necessarily have what our
Aerospace company needs for some applications, so we make exceptions for
those.

Doug Pauls



prashant chopra <[log in to unmask]> Sent by: TechNet
<[log in to unmask]>
09/29/2011 07:34 AM
Please respond to
TechNet E-Mail Forum <[log in to unmask]>; Please respond to prashant chopra
<[log in to unmask]>


To
<[log in to unmask]>
cc

Subject
[TN] DFM Guidelines v/s IPC Guidelines






Hi,
 
Hello everyone. I have a very basic question here.
 
Why do we require our own specific DFM guidlines (every OEM / CM will have 


their own specific DFM Guideline) when we have the IPC guidelines defined 
and available?
 
I am looking for the pointers and specific examples which can highlight 
the need to have and develop specific DFM guidelines for a company.
 
Thanks in advance.
 
Regards 
Prashant

______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask] 
______________________________________________________________________

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 16.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to 
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to 
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
For additional information, or contact Keach Sasamori at [log in to unmask] or 


847-615-7100 ext.2815
-----------------------------------------------------



______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask] 
______________________________________________________________________

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 16.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
For additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------




______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask] 
______________________________________________________________________

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 16.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
For additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------




______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask] 
______________________________________________________________________

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 16.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
For additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask] 
______________________________________________________________________

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 16.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
For additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

ATOM RSS1 RSS2