Thanks, Dean. However, I only need a few, and baking the reels for 2
weeks at 40 C isn't practical at this point. 

Blair 

-----Original Message-----
From: Stadem, Richard D. [mailto:[log in to unmask]] 
Sent: Monday, September 26, 2011 3:49 PM
To: TechNet E-Mail Forum; Hogg, Blair K.
Subject: RE: [TN] Baking MSD Devices

If you read IPC 033 B they have lower bake temp guidelines for longer
times, so you do not have to take the parts out of the reels. Get the
spec and save bajillions. 

-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Blair Hogg
Sent: Monday, September 26, 2011 2:16 PM
To: [log in to unmask]
Subject: [TN] Baking MSD Devices

Technetters,

I have a need to bake some BGAs that are MSD 3. these are on a reel and
I am suspecting that it isn't a good idea to put a reel in an oven at
125 C. 

Is there a good source for trays - I need one for a FBGA64 device -
SPANSION S29GL064A90FFIR23 and one for a FBGA256 - ALTERA
EPM570GF256I5N.

Thanks,

Blair
*******************************************************************
This email and any files transmitted with it are confidential and
intended solely for the use of the individual or entity to whom
they are addressed. If you have received this email in error please
notify the system manager. This footnote also confirms that this
email message has been swept for the presence of computer viruses.
www.Hubbell.com - Hubbell Incorporated**



______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask] 
______________________________________________________________________

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 16.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
For additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------