Subject: | |
From: | |
Reply To: | |
Date: | Fri, 12 Aug 2011 11:09:26 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
There is a smaller tube cutter used for cutting steel brake lines. You
can pick it up at your local auto parts store. It has a smaller cutting
and guide wheel to handle the smaller diameter break lines.
Ted T.
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Steven Creswick
Sent: Friday, August 12, 2011 9:51 AM
To: [log in to unmask]
Subject: Re: [TN] FW: Metal can, transistor, delidding tool
Victor,
To follow through with Dave's idea - take a peek at these pics. I
believe
that I could modify my cutter rollers in about an hour - a bit longer if
the
rollers were hardened. Definitely would want to take some of the excess
'play' out of the cutter guide assembly.
http://ipc-technet.groupsite.com/gallery/20950
Definitely works for a T0-5, but won't work for some of the optical
TO-92's,
or power TO-3's etc. Not what I had used in the past, but if you don't
have
too many to open and you can not locate a ready-made one .... it may be
worth a try.
PS - I am not pro or con on this particular tubing cutter. Just happens
to
be the one I recently purchased when my old one finally stopped cutting
properly. This one is nice, however, because the cutting wheel assembly
is
easily dis-assembled.
I believe that I picked this up at Lowe's or Menards {Home Improvement
Centers}
Steve Creswick
Sr Associate - Balanced Enterprise Solutions
http://www.linkedin.com/in/stevencreswick
616 834 1883
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or
[log in to unmask]
______________________________________________________________________
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 16.0
To unsubscribe, send a message to [log in to unmask] with following text
in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at:
http://listserv.ipc.org/archives
For additional information, or contact Keach Sasamori at [log in to unmask]
or 847-615-7100 ext.2815
-----------------------------------------------------
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 16.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
For additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
|
|