Here's photos:
http://ipc-technet.groupsite.com/gallery/20543
And it does appear mostly at the stressed points of the shield. There is also a good bit of it on the Zinc-galvanized hardware, and the galvanized and powder coated Chassis inside corners. Plain steel hardware is rusted.
The chassis lid is sealed with a metal/foam gasket. No corrosion at all there. There is some rust where the gasket contacts the untreated steel lip of the chassis.
We're going to run temp/humidity testing on the board and shield by themselves, not in the assembly.
Pete
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 16.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
For additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------