IPC-610 is the cerification for the inspectors showing they are qualified to inspect the assembled board to IPC-610 requirements. J-STD-001 is the criteria for assembly of the board. Normal certification to be qualified as a J-STD 001 assembler is you have IPC-J-STD-001 training. Both require a traing class, a test showing proficiency and the person receives a certificate of qualifiaction. See a training organization like BLACKFOX's web site for more details on the training
IPC-600 covers only the bare board criteria, not the assembled circuit card assembly it is in IPC-610> Date: Thu, 28 Jul 2011 17:05:15 -0700
> From: [log in to unmask]
> Subject: Re: [TN] IPC-A-600 CERTIFICATION
> To: [log in to unmask]
>
> I found a proposal which read as follows:
>
> "Inspection and acceptability of rigid printed wiring boards shall be in
> accordance with IPC-A-600 and IPC 6011 Class 3."
>
> I am trying to use logic here and that may be the root of my problem.
>
> In the same proposal there is a line which reads:
>
> "Inspection and acceptability of electronic assemblies shall be in
> accordance with IPC-A-610 Class 3."
>
> Since we certify our personnel to 610, my logic says we need to certify
> to 600.
>
> Or is there a technical out somewhere that I am missing?
>
> Thanks in advance,
>
> Phil
>
> -----Original Message-----
> From: Stadem, Richard D. [mailto:[log in to unmask]]
> Sent: Thursday, July 28, 2011 8:47 AM
> To: TechNet E-Mail Forum; Bavaro, Phillip @ MWG - TW
> Subject: RE: IPC-A-600 CERTIFICATION
>
> We train and certify to both IPC-A-600 and portions of IPC-6012 as well.
> Class 3 product.
> Client companies train/certify to IPC-A-600, plus some have PWB
> Workmanship Standards as well. Class 2 and 3 product.
>
> -----Original Message-----
> From: TechNet [mailto:[log in to unmask]] On Behalf Of Phil Bavaro
> Sent: Thursday, July 28, 2011 10:17 AM
> To: [log in to unmask]
> Subject: [TN] IPC-A-600 CERTIFICATION
>
> This seemed like a no brainer to me but I am getting heavy resistance
> when I recommend certification for those who inspect PWBs.
>
> My question is do you have your personnel who are performing incoming
> inspection on PWBs trained and certified to IPC-A-600?
>
> We currently only train and certify to J-STD-001 and IPC-A-610 and our
> product is class 3.
>
>
>
>
>
>
>
>
>
>
> ______________________________________________________________________
> This email has been scanned by the MessageLabs Email Security System.
> For more information please contact helpdesk at x2960 or
> [log in to unmask]
> ______________________________________________________________________
>
> ---------------------------------------------------
> Technet Mail List provided as a service by IPC using LISTSERV 16.0
> To unsubscribe, send a message to [log in to unmask] with following text
> in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt or (re-start) delivery of Technet send e-mail to
> [log in to unmask]: SET Technet NOMAIL or (MAIL)
> To receive ONE mailing per day of all the posts: send e-mail to
> [log in to unmask]: SET Technet Digest
> Search the archives of previous posts at:
> http://listserv.ipc.org/archives
> For additional information, or contact Keach Sasamori at [log in to unmask]
> or 847-615-7100 ext.2815
> -----------------------------------------------------
>
> ------------------------------------------------------------------------------
> This message and any attachments are solely for the use of the addressee and may contain L-3 proprietary information that may also be defined as USG export controlled technical data. If you are not the intended recipient, any disclosure, use or distribution of its content is prohibited. Please notify the sender by reply e-mail and immediately delete this message and any attachments.
>
>
>
>
> ______________________________________________________________________
> This email has been scanned by the MessageLabs Email Security System.
> For more information please contact helpdesk at x2960 or [log in to unmask]
> ______________________________________________________________________
>
> ---------------------------------------------------
> Technet Mail List provided as a service by IPC using LISTSERV 16.0
> To unsubscribe, send a message to [log in to unmask] with following text in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
> To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
> Search the archives of previous posts at: http://listserv.ipc.org/archives
> For additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
> -----------------------------------------------------
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 16.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
For additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
