建议参照IPC J-STD-001E附录中的规定。
Best Regards,
James Liu 刘春光
Director, IPC China Training Centers/Technology 培训中心主任/技术总监
IPC China
NEW:2011年7月北京/10月成都/11月武汉/12月深圳
IPC2011年“热魔”杯手工焊接竞赛各分赛区期待您的参与!
IPC围脖,实时报道IPC中国动态,欢迎加好友!
搜狐:http://t.sohu.com/ipcchina
腾讯:http://t.qq.com/IPC_China
新浪:http://weibo.com/ipcchina
网易:http://t.163.com/ipcchina
[cid:[log in to unmask]]
北京市经济技术开发区荣华中路15号朝林大厦B05
Room B05, Zhaolin Building, #15 Ronghua Zhong Road, BDA 100176 Beijing China
Tel: +86 10 67885326
Fax: +86 10 67885326
MP: +86 136 0133 3491
[log in to unmask]<mailto:[log in to unmask]>
www.ipc.org.cn<http://www.ipc.org.cn/>
发件人: TGAsia [mailto:[log in to unmask]] 代表 王云峰
发送时间: 2011年7月12日 15:39
收件人: TGAsia
主题: [TGAsia] 关于烙铁校准的标准问题
[log in to unmask]<mailto:[log in to unmask]>:你好!
目前我们烙铁判断是否合格的方法,是以点温计实测烙铁头温度(加焊锡),如果测试温度与设置显示温度差值在±20℃即判断为合格,否则送原厂调试。(点温计本身是半年校准一次)
现在客户在审核我们工厂后对烙铁合格的判定标准提出了疑问,认为±20℃太大,不可接受。
请教下各位,±20℃的判定标准是否合适?没有专业比对设备的情况下,有没有其他好的判断方法?
注:我们公司产品体积很小
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask]<mailto:[log in to unmask]>
______________________________________________________________________