Subject: | |
From: | |
Reply To: | |
Date: | Fri, 8 Jul 2011 16:23:49 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
All -
I have a situation where we are experiencing micro-voids in solder joints after SMT reflow. Problem manifest itself primarily in BGA to solder ball interface ( at the device junction interface and not the PWB to solder ball interface) confirmed with cross sectioning. BGA solder joints are weak resulting in electrical failures and removal with minimal mechanical stress.
We are using a Kester 256 HA (62-36-2) solder paste on a electrolytic PWB finish. The same board with the same process using ENiG does not exhibit this problem.
Ionic, XRF and SIMS analysis does not reveal any surface or interlayer organic contamination. I have seen old publications indicating this phenomena has been observed before with hard gold chemistries.
DOEs conducted by varying reflow dwell times / surface cleaning / pre-bake does not remedy the situation
Any thoughts or experience with salvaging built CCAs or reclaiming bare boards to eliminate this issue?
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 16.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
For additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
|
|