Phil,
The PWB manufacturer must certify that the PWB meet the 600 and 6011, class 3. If you are the PWB manufacturer than yes you should certify to 600 and 6011.
Hope this helps,
Tom
----- Original Message -----
From: Phil Bavaro [mailto:[log in to unmask]]
Sent: Thursday, July 28, 2011 05:05 PM
To: [log in to unmask] <[log in to unmask]>
Subject: Re: [TN] IPC-A-600 CERTIFICATION
I found a proposal which read as follows:
"Inspection and acceptability of rigid printed wiring boards shall be in
accordance with IPC-A-600 and IPC 6011 Class 3."
I am trying to use logic here and that may be the root of my problem.
In the same proposal there is a line which reads:
"Inspection and acceptability of electronic assemblies shall be in
accordance with IPC-A-610 Class 3."
Since we certify our personnel to 610, my logic says we need to certify
to 600.
Or is there a technical out somewhere that I am missing?
Thanks in advance,
Phil
-----Original Message-----
From: Stadem, Richard D. [mailto:[log in to unmask]]
Sent: Thursday, July 28, 2011 8:47 AM
To: TechNet E-Mail Forum; Bavaro, Phillip @ MWG - TW
Subject: RE: IPC-A-600 CERTIFICATION
We train and certify to both IPC-A-600 and portions of IPC-6012 as well.
Class 3 product.
Client companies train/certify to IPC-A-600, plus some have PWB
Workmanship Standards as well. Class 2 and 3 product.
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Phil Bavaro
Sent: Thursday, July 28, 2011 10:17 AM
To: [log in to unmask]
Subject: [TN] IPC-A-600 CERTIFICATION
This seemed like a no brainer to me but I am getting heavy resistance
when I recommend certification for those who inspect PWBs.
My question is do you have your personnel who are performing incoming
inspection on PWBs trained and certified to IPC-A-600?
We currently only train and certify to J-STD-001 and IPC-A-610 and our
product is class 3.
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or
[log in to unmask]
______________________________________________________________________
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 16.0
To unsubscribe, send a message to [log in to unmask] with following text
in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at:
http://listserv.ipc.org/archives
For additional information, or contact Keach Sasamori at [log in to unmask]
or 847-615-7100 ext.2815
-----------------------------------------------------
------------------------------------------------------------------------------
This message and any attachments are solely for the use of the addressee and may contain L-3 proprietary information that may also be defined as USG export controlled technical data. If you are not the intended recipient, any disclosure, use or distribution of its content is prohibited. Please notify the sender by reply e-mail and immediately delete this message and any attachments.
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 16.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
For additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 16.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
For additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|