Hi Jim,
Here ya' go:
http://stevezeva.homestead.com/Conformal_Coat.jpg
Steve
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Marsico, James - ES
Sent: Thursday, July 14, 2011 8:27 AM
To: [log in to unmask]
Subject: Re: [TN] IPC-A-610 Conformal Coating - Coverage
I know. I sent a copy to Steve Gregory to post.
Jim Marsico
ITT Corporation
1500 New Horizons Blvd.
North Amityville, NY 11701
631-630-5079
[log in to unmask]
-----Original Message-----
From: [log in to unmask] [mailto:[log in to unmask]]
Sent: Thursday, July 14, 2011 8:26 AM
To: [log in to unmask]; Marsico, James - ES
Cc: [log in to unmask]
Subject: RE: IPC-A-610 Conformal Coating - Coverage
Jim,
The provided URL address did not display an image.
Victor,
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Marsico, James - ES
Sent: Thursday, July 14, 2011 6:27 AM
To: [log in to unmask]
Subject: Re: [TN] IPC-A-610 Conformal Coating - Coverage
In my humble opinion, your interpretation is correct, that is, no voids are
allowed that bridge component leads. The criteria below is what we use in
our internal conformal coating document. If you can't see the criteria
below please let me know and I can forward it to you directly.
[cid:[log in to unmask]]
Jim Marsico
ITT Corporation
1500 New Horizons Blvd.
North Amityville, NY 11701
631-630-5079
[log in to unmask]
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Lum Wee Mei
Sent: Thursday, July 14, 2011 3:34 AM
To: [log in to unmask]
Subject: [TN] IPC-A-610 Conformal Coating - Coverage
Dear All,
Can some kind souls help me to interpret the below statement taken out
from IPC-A-610 Section 10.5.2.2 Conformal Coating - Coverage? I am look
at Class 3 and I am loss on its interpretation, especially 'Voids or
bubbles'.
Acceptable - Class 1, 2, 3
No bridging of adjacent lands or conductive surfaces from :
* Loss of adhesion (mealing)
* Voids or bubbles
* Dewetting
* Cracks
* Ripples
* Fisheyes or orange peel
It is common to find bubbles trapped between the soldered leads of those
gull-leaded components and between closely mounted SMDs passives for
brushing method. Are these bubbles allow for Class 3?
Thanks and regards,
~wee mei~
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 16.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
For additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------
________________________________
This e-mail and any files transmitted with it may be proprietary and are
intended solely for the use of the individual or entity to whom they are
addressed. If you have received this e-mail in error please notify the
sender.
Please note that any views or opinions presented in this e-mail are solely
those of the author and do not necessarily represent those of ITT
Corporation. The recipient should check this e-mail and any attachments for
the presence of viruses. ITT accepts no liability for any damage caused by
any virus transmitted by this e-mail.
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 16.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
For additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 16.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
For additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 16.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
For additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|