Hi Amol,

I've used 3M Scotch-weld DP190 on military product before (armored fighting
vehicles, aerospace) to bond components down. It's a 2-part epoxy and will
fully cure at room temp, but not very fast (7-days). I would recommend
putting it in a 200F oven for at least 30-minutes to get the cure going.

Steve

-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Amol Kane
Sent: Monday, July 18, 2011 11:43 AM
To: [log in to unmask]
Subject: [TN] glue for part addition

Dear Technetters,
Our customer has requested us to piggy back an 0805 resistor such that one
termination will be soldered to another 0805 component (terminations from
these two components will share half the pad each) while a jumper wire will
be attached to the other end and go to a via on the board. The part will be
on soldermask and will not have a board pad on the other side. Can anyone
suggest a fast room temperature cure adhesive to stake this part to the PCB?
Class 3 application

Thanks,
Amol


______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask] 
______________________________________________________________________

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 16.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
For additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------


______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask] 
______________________________________________________________________

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 16.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
For additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------