We went to a company called Sciencescope for our units. We have 3
that are on fixed platforms (desktop computers) with separate video
cards. We also have 3 semi-portable that use laptops and USB cameras,
we have them on roll around printer stands that we can use in the field.
ESD is not much of an issue as we have typically 60% humidity and we use
grounded mats under the boards.
Pat Goodyear
Control Technician
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Inge Hernefjord
Sent: Wednesday, June 01, 2011 6:57 AM
To: [log in to unmask]
Subject: Re: [TN] Microscope Cameras
Hi Steve,
Correct. I bought these:
http://www.microscope-depot.com/compound-monocular-5meg-lcd.htm
they cost nothing compared with the professional cameras. The pics come
out pretty good, after a lot of mixing with the software. You need time
to make a reasonable result. That's expected for that price. I recommend
them, but you have to accept a bit lower quality than what you used to
get when you were at your company lab.
Good Click!
Inge
On 1 June 2011 10:40, Steven Creswick <[log in to unmask]> wrote:
> Inge,
>
> I hope that everything is going well for you in your current projects.
>
> I would like a bit of input on a former project of yours. A couple
> years ago you posted on microscope cameras that you purchased.
>
> I am now looking for a personal/lab microscope camera. I would like
> to know how your cameras are holding up.
>
> Does the software perform the tasks it claims to handle?
>
> Have you noted significant difference between the image quality of
> the 3 & 5 Megapixel cameras at <100X magnification?
>
> Have you seen other cameras out there that piqued your interest?
>
> If you or anyone else has comments, updates, or suggestions, I am
> interested!
>
> TIA
>
>
> Steve Creswick
> http://www.linkedin.com/in/stevencreswick
>
>
>
>
> -----Original Message-----
> From: TechNet [mailto:[log in to unmask]] On Behalf Of Inge
> Sent: Tuesday, August 04, 2009 5:08 PM
> To: [log in to unmask]
> Subject: [TN] Microscope cameras
>
> We had several discussions about cheap solutions, remember?
'Professional'
> cameras, i.e. from the microscope manufacturers themselves, are very
> expensive. There may be a reason for that. However, when your budget
> does not fit, you are forced to make other choice. I found the below
> dealer for a
>
> chinese brand. I bought two, one 3 and one 5 Megapixel, got them
> yesterday and installed them immediately on a metalurgical microscope
> and on a stereo one. Took a couple of minutes. I'm very satisfied with
> the camera and the program. It can't cope with my former Nikon
> DXM1200, but it covers most that
>
> I need. And the price is 1/15 th of the cost for a professional
> camera. And the delivery is instant. And there is a whole bunch of
> adapters and other things in the box. Seems as you can mount to any
microscope on the market.
> Smart.
>
> Inge
>
> http://www.microscope-depot.com/cameras.htm
>
>
>
> ______________________________________________________________________
> This email has been scanned by the MessageLabs Email Security System.
> For more information please contact helpdesk at x2960 or
> [log in to unmask]
> ______________________________________________________________________
>
> ---------------------------------------------------
> Technet Mail List provided as a service by IPC using LISTSERV 16.0 To
> unsubscribe, send a message to [log in to unmask] with following text in
> the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt
> or (re-start) delivery of Technet send e-mail to
> [log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing
> per day of all the posts: send e-mail to
> [log in to unmask]: SET Technet Digest
> Search the archives of previous posts at:
> http://listserv.ipc.org/archives For additional information, or
> contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
> -----------------------------------------------------
>
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or
[log in to unmask]
______________________________________________________________________
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 16.0 To
unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or
(re-start) delivery of Technet send e-mail to [log in to unmask]: SET
Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the
posts: send e-mail to [log in to unmask]: SET Technet Digest Search the
archives of previous posts at: http://listserv.ipc.org/archives For
additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 16.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
For additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|