TECHNET Archives

May 2011

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
"Whittaker, Dewey (EHCOE)" <[log in to unmask]>
Reply To:
TechNet E-Mail Forum <[log in to unmask]>, Whittaker, Dewey (EHCOE)
Date:
Wed, 4 May 2011 06:40:51 -0700
Content-Type:
text/plain
Parts/Attachments:
text/plain (345 lines)
Yeah, but are you really in the game or just hanging around the rim.
With all due respect
Dewey

-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Bev Christian
Sent: Tuesday, May 03, 2011 4:44 PM
To: [log in to unmask]
Subject: Re: [TN] "The Curse of IPC-A-610 and IPC-J-STD-001" - opinion
piece by James Smith

Inge,
Hey! Laura Turbini, Joyce Koo and I are still Quality and people in our
company KNOW we are still here!
Bev
RIM

-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Inge H
Sent: Tuesday, May 03, 2011 3:59 PM
To: [log in to unmask]
Subject: Re: [TN] "The Curse of IPC-A-610 and IPC-J-STD-001" - opinion
piece
by James Smith

.....quality teams...! Do they still exist? When I was young, they were 
semper fi. Nowadays more like semper fin. The quality engineer was
highly 
respected, not to say dreaded. Not seldom he reported directly to the
head. 
The q guys today are often reduced to shy people anxious not to disturb
and 
without the authority that comes after many, many years of sniffing
machine 
oils.
I hope on the return of Yoda.
Inge


----- Original Message ----- 
From: "Whittaker, Dewey (EHCOE)" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Tuesday, May 03, 2011 4:00 PM
Subject: Re: [TN] "The Curse of IPC-A-610 and IPC-J-STD-001" - opinion
piece

by James Smith


The 5 S principles have had that effect on a lot of floors.
Nice to find you in good spirits.
Dewey

-----Original Message-----
From: Brian Ellis [mailto:[log in to unmask]]
Sent: Monday, May 02, 2011 10:58 PM
To: TechNet E-Mail Forum; Whittaker, Dewey (EHCOE)
Subject: Re: [TN] "The Curse of IPC-A-610 and IPC-J-STD-001" - opinion
piece by James Smith

The bar seems to raise itself at times, after the sixth single malt. As
for the floor lowering, five suffice before it moves all over the place.

Brian

On 02/05/2011 20:30, Whittaker, Dewey (EHCOE) wrote:
> Even with the best intent on your part to justifiably "raise the bar",
> this is a potentially false perception due to your supply chain
> implementing a "lowering of the floor" strategy.
> This is on a par with me trying to explain how clever and witty
> "Deweyisms" are to someone when English is not their native language.
> Dewey
>
> -----Original Message-----
> From: TechNet [mailto:[log in to unmask]] On Behalf Of Brooks, Bill
> Sent: Monday, May 02, 2011 9:52 AM
> To: [log in to unmask]
> Subject: Re: [TN] "The Curse of IPC-A-610 and IPC-J-STD-001" - opinion
> piece by James Smith
>
> I have been 'listening' to this thread and it kind of struck a nerve.
> 'Designing to minimums' or to 'just meet a spec'.  Not just meeting
> minimums on the low side of the 'bell curve'... but DESIGNING to the
> minimums... I have seen this happen a number of times where someone
> reads a MIN. requirement spec and then designs to it. WRONG! Only
> inexperienced folks who don't understand tolerances' do this sort of
> thing.
> When we train PCB designers we drill it into their heads... don't
forget
> the tolerances. Worst case means WORST case....even after everything
> else has gone to the extreme limits... If you want reliability you
need
> to design in some 'de-rating' into your tolerance calculations... give
> yourself some 'head room' for things to go wrong... a good design will
> still fly even if everything else has failed... by design. It doesn't
> happen by accident.
>
> I believe board manufacturers use the IPC standards as a way to
commonly
> agree what minimum acceptance they can 'get away with' process-wise...
> but if their customers aren't designing their products to achieve the
> results needed then they are going to just make a lot of scrap.
> Tolerances statistically will get you every time!
>
> Maybe what this guy James Smith was 'trying' to say is, (even though
he
> did it badly), that he needs to 'raise the bar' of the design higher
> because he is seeing the quality of the boards coming in and they
aren't
> acceptable to him or his company... even though they are meeting the
IPC
> standards. Maybe he needs to hold his vendors to a 'higher standard'
or
> or rather a higher design requirement... ??? Typically when the min
> requirements stated in an IPC standard are not acceptable to us for
our
> product, we put an exclusion or acception in the notes of the drawing
to
> say how our requirements differ from the spec. IPC specs are a
> baseline... from there you can design in the higher quality through
your
> DESIGN requirements. DON'T design to the minimums... BAD DOG... TIME
> OUT... NO COOKIE...
> Frankly, James is blaming the wrong guys... it's not the IPC
> standards... it the design and quality teams not setting the
> requirements high enough for his product.
>
> Imho :)
>
>
> Best regards,
>
>
> Bill Brooks | Datron World Communications, Inc.
> PCB Designer/Engineer | Office: 760-602-7004| Fax: 760-597-3777 |
> [log in to unmask]
> 3055 Enterprise Court, Vista, CA 92081 | www.dtwc.com
>
> Performance You Require. Value You ExpectTM
> -----Original Message-----
> From: TechNet [mailto:[log in to unmask]] On Behalf Of Woolley, Mark D.
> (Mark)
> Sent: Monday, May 02, 2011 7:16 AM
> To: [log in to unmask]
> Subject: Re: [TN] "The Curse of IPC-A-610 and IPC-J-STD-001" - opinion
> piece by James Smith
>
> Sorry, Let me try again.  (I don't know what happened the last time.)
>
> Being a slave to "Standards" is not where we should be as an industry.
> The "standards" are, in reality, minimum acceptable criteria.  I often
> hear manufacturers state that they build to a standard or their
product
> meets the "standards."
>
> However, as I inspect these products per the same standards (mostly
> IPC-A-600 and IPC-A-610), I see that while the product might meet the
> "Standards" it was manufactured along the minimum edge of
acceptability
> per the standard.
>
> An example: Visible, opaque particulates embedded in the solder mask
> might meet the IPC-A-610 standard if they do not encroach on certain
> areas of the PWB.  But what does finding multiple occurrences of
> particulates in the solder mask mean in terms of the PWB manufacturing
> quality?  Unless you are dealing with military classes, in mass
> production a close visual inspection can only be performed on a
limited
> number of units. If those units barely meet the standard what does
that
> indicate about the remainder?  (How many particulates might be
embedded
> within the PWB layers where they are not readily visible?  And of
these
> how many could eventually cause a short?)
>
> Meeting the Standards is not sufficient to build a reliable product.
> The standards must always remain as the minimum acceptable criteria
not
> as the expected mean or median product.
>
> The IPC committees put long hours into each specification to clarify
> points and make the items as understandable as possible.  IPC-A-610E
> (and later revisions) is a great asset.  Pictures showing both the
good
> and the bad are presented.  But never is it stated in the
specification
> (that I have read) that a process that consistently produces products
at
> the edge of acceptability (per the standard) is acceptable to
industry.
>
> Having said that I must agree with Brian's statement:
>
> "In short, Standards, used appropriately, can help, as far as
possible,
> to perfect reliability for a given application. Used inappropriately,
> they can drive up costs dramatically ..."
>
> There needs to be common sense in the application of the standards,
both
> from a user and a manufacturer point of view.  Customers' don't want
> manufacturers to hide behind the "Standards' Wall" when confronted
with
> issues with their products.  And the products should be manufactured
in
> a manner that places only the smallest percentage, (ideally none) of
> products below these limits.
>
>
>
> mark
> Mark Woolley |PTRL Laboratory | Avaya | 1300 West 120th Ave |
> Westminster, CO 80234  USA |
> Voice (Lab): (303) 538-2166 | email: [log in to unmask] |
>
>
> ----
>
> ______________________________________________________________________
> This email has been scanned by the MessageLabs Email Security System.
> For more information please contact helpdesk at x2960 or
> [log in to unmask]
> ______________________________________________________________________
>
> ---------------------------------------------------
> Technet Mail List provided as a service by IPC using LISTSERV 16.0
> To unsubscribe, send a message to [log in to unmask] with following text
> in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt or (re-start) delivery of Technet send e-mail to
> [log in to unmask]: SET Technet NOMAIL or (MAIL)
> To receive ONE mailing per day of all the posts: send e-mail to
> [log in to unmask]: SET Technet Digest
> Search the archives of previous posts at:
> http://listserv.ipc.org/archives
> For additional information, or contact Keach Sasamori at
[log in to unmask]
> or 847-615-7100 ext.2815
> -----------------------------------------------------
>
> ______________________________________________________________________
> This email has been scanned by the MessageLabs Email Security System.
> For more information please contact helpdesk at x2960 or
[log in to unmask]
> ______________________________________________________________________
>
> ---------------------------------------------------
> Technet Mail List provided as a service by IPC using LISTSERV 16.0
> To unsubscribe, send a message to [log in to unmask] with following text
in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
> To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
> Search the archives of previous posts at:
http://listserv.ipc.org/archives
> For additional information, or contact Keach Sasamori at
[log in to unmask] or 847-615-7100 ext.2815
> -----------------------------------------------------
>

______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or
[log in to unmask]
______________________________________________________________________

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 16.0
To unsubscribe, send a message to [log in to unmask] with following text
in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to 
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to 
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at:
http://listserv.ipc.org/archives
For additional information, or contact Keach Sasamori at [log in to unmask]
or 
847-615-7100 ext.2815
----------------------------------------------------- 


______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or
[log in to unmask] 
______________________________________________________________________

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 16.0
To unsubscribe, send a message to [log in to unmask] with following text
in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at:
http://listserv.ipc.org/archives
For additional information, or contact Keach Sasamori at [log in to unmask]
or
847-615-7100 ext.2815
-----------------------------------------------------


______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or
[log in to unmask] 
______________________________________________________________________

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 16.0
To unsubscribe, send a message to [log in to unmask] with following text
in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at:
http://listserv.ipc.org/archives
For additional information, or contact Keach Sasamori at [log in to unmask]
or 847-615-7100 ext.2815
-----------------------------------------------------

______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask] 
______________________________________________________________________

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 16.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
For additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

ATOM RSS1 RSS2