TECHNET Archives

April 2011

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Blair Hogg <[log in to unmask]>
Reply To:
TechNet E-Mail Forum <[log in to unmask]>, Blair Hogg <[log in to unmask]>
Date:
Fri, 15 Apr 2011 11:49:17 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (31 lines)
The stuff is also available from Chemtronics in 1g jugs, and a reponse I got from them said it would likely need to be diluted with DI water, which may increase cure time. 

Any comments on EFD vs. Manncorp dispensing equipment?

Thanks,

Blair

On Fri, 15 Apr 2011 11:40:10 -0400, Steven Creswick <[log in to unmask]> wrote:

>Blair,
>
>Provided you, or the operators, are comfortable with transferring the partial contents of the squeezie bottles to 30cc syringes [use a piston in the syringe so there is less chance of sucking latex back into the valve if they have the vac pull-back on], they should be happy to use an EFD [or similar] dispenser.
>
>Now you have to pay for disposable syringes, pistons and needles, however.
>
>Steve Creswick
>http://www.linkedin.com/in/stevencreswick
>
>

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 16.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
For additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

ATOM RSS1 RSS2