Hello TechNet
I thought I should send along my conclusion to this quest.

After some discussions with Circuit Tech Center (Thanks Andy!), we had a
custom set of traces made.  The traces I had been looking to replicate
are pretty odd, and in my original quest I had just hoped to find
long/wide traces that I could then trim to modify into what I needed.
By having Circuit Tech make the traces I get what I need which are:
1)	A trace 2" long that evenly tapers from .065" to .015"
2)	A trace 2" long that is .016" until just before the end, where
it flares out a bit.

Now you can get back to watching the British royal wedding
festivities...  :-)  Happy Friday!

regards,
 - Graham

_____________________________________________
From: Collins, Graham (FN) @ PRG - ESI 
Sent: Thursday, February 24, 2011 8:09 AM
To: 'TechNet E-Mail Forum'
Subject: Trace repair, need material source


Hello TechNet
I'm looking at the repair of some RF gizmos, and have to replace a
corroded trace.  It is wider than the standard repair materials
available from Circuit Tech (who are our usual source).  They only go up
to .030" wide.

Anyone know of an easy source of repair material to replicate traces
that are about .075" wide, about .003 thick, and 2" long?

Thanks!

regards, 
  
Graham Collins 
Halifax Production Engineering 
L-3 communications Electronic Systems 
(902) 873-2000 ext. 6215 

This message and any attachments are solely for the use of the
individual or entity to which it is addressed and may contain
information that is privileged or confidential or controlled technical
data that is subject to the laws of Canada or the United States. If you
are not the intended recipient, any disclosure, use or distribution of
the information contained herein is prohibited. If you have received
this communication in error, please notify the sender by reply e-mail
and immediately delete this message and any attachments.



______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask] 
______________________________________________________________________

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 16.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
For additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------