From the PWB point of view we see changes in capacitance associated with
material damage caused by assembly and rework. Frequently crazing,
cohesive failure and delamination occur in the central zone of the PWB.
Material degradation is more prevalent in lead free applications. Some
of the high Tg, phenolic cured epoxy systems have a propensity to
material damage.
Could material damage account for the vagrancies you are seeing?
Sincerely,
Paul Reid
Program Coordinator
PWB Interconnect Solutions Inc.
235 Stafford Rd., West, Unit 103
Nepean, Ontario
Canada, K2H 9C1
613 596 4244 ext. 229
Skype paul_reid_pwb
[log in to unmask] <mailto:[log in to unmask]>
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Pete
Sent: March 22, 2011 11:18 AM
To: [log in to unmask]
Subject: [TN] Fabrication failures in one area of board?
We are trying to get an RF board functioning, and are having
difficulties in the
same area of a couple boards. The circuit turns on, but with drastic
performance differences
This board has 4 identical TX Channels, Channel 1, at the edge of the
board
works every time, but as we move inward, we experience more failures.
Channel 4, at the center of the board will not perform properly on any
board.
A visual examination doesn't show any differences that might impact
performance. The soldering process looks OK.
Is there something that could likely vary in the fabrication process
that might
cause this? It's (supposed to be) a standard 170Tg, non-dicy, RoHS fab.
High copper density, but the center channels are near an area of less
copper
density. Could an epoxy curing variation occur, that might impact
getting a
consistent dielectric result? What should I be looking for? These
boards were
not ordered from our qualified vendor, and I have some concerns. We had
issues with them before.
Pete
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text
in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at:
http://listserv.ipc.org/archives
Please visit IPC web site
http://www.ipc.org/ContentPage.aspx?Pageid=E-mail-Forums for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100
ext.2815
-----------------------------------------------------
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/ContentPage.aspx?Pageid=E-mail-Forums for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|