We have a nylon connector that they have told us is moisture sensitive.
I believe they told us something similar, that they don't actually
specify an MSL level, but in this case they did tell us that they
"handle it as if it is a" MSL 5a part. Bake for 4 hours at 120 if out
of bag for more than 24 hours.
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Amol Kane
Sent: February 17, 2011 8:43 AM
To: [log in to unmask]
Subject: [TN] MSL on Connectors
Dear Technetters,
I am attaching an excerpt of e-Mail conversation between Molex and
myself on the subject matter of whether a connector is Moisture
sensitive. The connector reel has a "MOISTURE SENSITIVE COMPONENT"
stamp, but no other information on the original product packaging.
Has anybody else encountered this situation
before?....thoughts/comments??
From Molex:
Good Morning Amol,
Please see the response below from the product manager regarding the
moisture sensitivity for Part Number 532610371:
Yes, once the product is out of the packaging, it is moisture sensitive.
In order to protect it from moisture, we put the product in the high
barrier bag and also put the desiccants into them. Then, it is vacuumed
the air and sealed with heat.
I have attached the packaging specification which further describes the
packaging requirements for this product.
Regards,
RE: From Amol Kane
Thank you Michelle!.......so, if the part is moisture sensitive, what is
the Moisture Sensitivity Level (MSL) per J-STD-020 and why is that not
mentioned on the packaging?
RE: RE: From Molex
Amol,
Unfortunately, Molex does not specify MSLs for our products.
Regards,
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or
[log in to unmask]
______________________________________________________________________
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0 To
unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or
(re-start) delivery of Technet send e-mail to [log in to unmask]: SET
Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the
posts: send e-mail to [log in to unmask]: SET Technet Digest Search the
archives of previous posts at: http://listserv.ipc.org/archives Please
visit IPC web site
http://www.ipc.org/ContentPage.aspx?Pageid=E-mail-Forums for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100
ext.2815
-----------------------------------------------------
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/ContentPage.aspx?Pageid=E-mail-Forums for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
