Hi Joyce,
Actually, electrical resistivity is also not a fixed number for ED Cu, for the same reason that density is not fixed nor is etch rate, ductility and tensile strength.
None of this applies to rolled cu foil.
Werner
-----Original Message-----
From: Joyce Koo <[log in to unmask]>
To: 'Werner Engelmaier' <[log in to unmask]>; [log in to unmask] <[log in to unmask]>
Sent: Fri, Feb 25, 2011 2:13 pm
Subject: RE: [TN] Copper oz
Thanks for the warning. Foil thicknessand current carrying capability at ultra thin trace would be interesting toknow. Will see if flex guys got any tighten spec….Thanks again.
From: Werner Engelmaier [mailto:[log in to unmask]]
Sent: Friday, February 25, 20112:08 PM
To: [log in to unmask];Joyce Koo
Subject: Re: [TN] Copper oz
Joyce,
The best table is Table 1-1 in IPC-4562; however, be careful with thesenumbers—the thickness is given as 'Nominal Thickness' for a reason. ED Cu doesnot have a fixed density, and it also has bond enhancement treatments. Andsince Cu is solder by weight, foil thickness is customarily given in oz/ft2.
Werner (former chair of the copper foilcommittee)
-----OriginalMessage-----
From: Joyce Koo <[log in to unmask]>
To: [log in to unmask]
Sent: Fri, Feb 25, 2011 8:15 am
Subject: [TN] Copper oz
Guys and gals,
Any of young chaps know the table of Cu oz vs micron thickness in IPC std? I
know what the thickness should be, but need "official" table number with a spec.
Friday thing. Thx.
--------------------------
Sent using BlackBerry
----- Original Message -----
From: Wenger, George M. [mailto:[log in to unmask]]
Sent: Friday, February 25, 2011 07:56 AM
To: [log in to unmask] <[log in to unmask]>
Subject: Re: [TN] NTC Re: [TN] Something you have to see...
Steve,
You're stealing Dewy's lines. You must be on Doug's Dew this morning.
Regards,
George
George M. Wenger
Senior Principal Reliability / FMA Engineer
Andrew Corporation - Wireless Network Solutions
40 Technology Drive, Warren, NJ 07059
(908) 546-4531 Office (732) 309-8964 Mobile
E-mail: [log in to unmask]
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Steven Creswick
Sent: Friday, February 25, 2011 7:46 AM
To: [log in to unmask]
Subject: Re: [TN] NTC Re: [TN] Something you have to see...
Victor,
Now you have ME in stitches! We've got it all sewn up!
Steve Creswick
http://www.linkedin.com/in/stevencreswick
-----Original Message-----
From: [log in to unmask] [mailto:[log in to unmask]]
Sent: Friday, February 25, 2011 7:42 AM
To: [log in to unmask]; [log in to unmask]
Cc: [log in to unmask]
Subject: RE: [TN] NTC Re: [TN] Something you have to see...
Could stitch bonding not be a solution to this issue?
"X"
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Steven Creswick
Sent: Thursday, February 24, 2011 2:59 PM
To: [log in to unmask]
Subject: Re: [TN] NTC Re: [TN] Something you have to see...
He's better than that ... when he has his 'Dew' on!
He may want to utilize an automatic inspection system otherwise.
Steve Creswick
http://www.linkedin.com/in/stevencreswick
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Dennis Fritz
Sent: Thursday, February 24, 2011 3:54 PM
To: [log in to unmask]
Subject: [TN] NTC Re: [TN] Something you have to see...
Can this be entered into a "Which two chips are wired alike contest"?
Another IPC prize for Apex - Maybe Clumpy can spend a week getting the
answer.
-----Original Message-----
From: Steve Gregory <[log in to unmask]>
To: TechNet <[log in to unmask]>
Sent: Thu, Feb 24, 2011 1:54 pm
Subject: [TN] Something you have to see...
Hi All,
Some of might remember last year sometime when I posted a photo of something
ne of our operators accomplished that I was simply amazed with:
http://stevezeva.homestead.com/files/Quad_Stack.JPG
I thought that couldn't have been topped, but she has once again shocked and
wed me with her skill and patience:
http://stevezeva.homestead.com/One_piece_of_work.JPG
http://stevezeva.homestead.com/One_piece_of_work_2.JPG
http://stevezeva.homestead.com/One_piece_of_work_3.JPG
I can't believe we even quoted this job, much less accomplished it. There's
024 wires there, and BTW, that's 20-mil pitch. Simply astounding.
Steve
______________________________________________________________________
his email has been scanned by the MessageLabs Email Security System.
or more information please contact helpdesk at x2960 or [log in to unmask]
_____________________________________________________________________
---------------------------------------------------
echnet Mail List provided as a service by IPC using LISTSERV 15.0
o unsubscribe, send a message to [log in to unmask] with following text in
he BODY (NOT the subject field): SIGNOFF Technet
o temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
o receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
earch the archives of previous posts at: http://listserv.ipc.org/archives
lease visit IPC web site
http://www.ipc.org/ContentPage.aspx?Pageid=E-mail-Forums
or additional information, or contact Keach Sasamori at [log in to unmask] or
47-615-7100 ext.2815
----------------------------------------------------
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site
http://www.ipc.org/ContentPage.aspx?Pageid=E-mail-Forums for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100
ext.2815
-----------------------------------------------------
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site
http://www.ipc.org/ContentPage.aspx?Pageid=E-mail-Forums for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100
ext.2815
-----------------------------------------------------
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/ContentPage.aspx?Pageid=E-mail-Forums
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/ContentPage.aspx?Pageid=E-mail-Forums
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------
---------------------------------------------------------------------
This transmission (including any attachments) may contain confidential
information, privileged material (including material protected by the
solicitor-client or other applicable privileges), or constitute non-public
information. Any use of this information by anyone other than the intended
recipient is prohibited. If you have received this transmission in error, please
immediately reply to the sender and delete this information from your system.
Use, dissemination, distribution, or reproduction of this transmission by
unintended recipients is not authorized and may be unlawful.
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/ContentPage.aspx?Pageid=E-mail-Forums
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------
=
---------------------------------------------------------------------
This transmission (including any attachments) may contain confidential information, privileged material (including material protected by the solicitor-client or other applicable privileges), or constitute non-public information. Any use of this information by anyone other than the intended recipient is prohibited. If you have received this transmission in error, please immediately reply to the sender and delete this information from your system. Use, dissemination, distribution, or reproduction of this transmission by unintended recipients is not authorized and may be unlawful.
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/ContentPage.aspx?Pageid=E-mail-Forums for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|