TECHNET Archives

January 2011

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Steve Gregory <[log in to unmask]>
Reply To:
TechNet E-Mail Forum <[log in to unmask]>, Steve Gregory <[log in to unmask]>
Date:
Mon, 17 Jan 2011 15:55:54 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (98 lines)
Hi Cedric,

 

What does your last solder analysis say? You do get your pot analyzed don't
you?

 

Steve

 

 

****

From: TechNet [mailto:[log in to unmask]] On Behalf Of Cedric ORAIN
Sent: Monday, January 17, 2011 2:57 PM
To: [log in to unmask]
Subject: [TN] Board failure due to fibber like fragments of alloy after wave
soldering

 

After wave soldering of boards with both SMD and PTH components, 18% of the

boards failed during ICT.

The failure is due to shorts between SMD pads. 

 

These shorts are caused by "fibber like" fragments entrapped in solder

joints. We are looking for root cause of this level of waste.

 

These fragments are very similar in aspect with dross that we found on the

top of the wave "head" after the pump stop. You can see dross picture in the

pictures posted here:

 

http://ipc-technet.groupsite.com/gallery/17663

 

The alloy is Sn63Pb37 and the flux is an alcohol based no-clean flux.

Soldering under air atmosphere. The design of the board is ok. Dross is

removed daily.

 

Did you ever encountered this kind of issue (I mean with such a rate of

defect)?

I'm wondering if the aspect of the dross shown in the picture is normal or

is it due to a pollution (metallic pollution: high Cu rate?? / organic

pollution : epoxy, fiber glass fragments ...). 

 

Thanks for your in advance for your help and support,

 

Best regards,

 

Cedric ORAIN



______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask] 
______________________________________________________________________

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/ContentPage.aspx?Pageid=E-mail-Forums for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

ATOM RSS1 RSS2