Inge,
Golly! Mine looked far better than yours - and it was bad. Yours is
absolutely appalling!
Looks like you were the recipient of someone's development board - having
experienced multiple, manual, component changes with little regard for
appearances or reliability - and/or performed by a sub-entry level
technician with a soldering iron tip which was grossly over-sized for the
task.
I sincerely hope that this unit is one which should never escaped from the
engineering labs [even embarrassing to have it there] and does not represent
typical product from the supplier.
I would not be bashful about sending your photos and internal examination
comments to them so they can improve their process or procedures.
If all of their product looks like that, they are certain NOT to have return
customers!!!
Steve Creswick
http://www.linkedin.com/in/stevencreswick
-----Original Message-----
From: Inge [mailto:[log in to unmask]]
Sent: Friday, January 14, 2011 11:09 AM
To: TechNet E-Mail Forum; Steven Creswick
Subject: Re: [TN] a different Friday quiz
Gosh, you have not so ensuring thoughts about english electronics, Steve.
Maybe they had better send their products in a whisky tank? At least Lord
Nelson was in good condition after the shipment.
Inge
----- Original Message -----
From: "Steven Creswick" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Friday, January 14, 2011 4:41 PM
Subject: Re: [TN] a different Friday quiz
> "Note: 1. the unit has never been exposed to any other
> environment than inhouse atmosphere" - except during assembly, shipment,
> and
> warehouse storage ... Big unknowns when it could have been packed in a
> hydrogen sulfide rich cardboard box all along the way :-)
>
> Fair weather and calm winds!
>
> Steve Creswick
> http://www.linkedin.com/in/stevencreswick
>
>
>
>
> -----Original Message-----
> From: TechNet [mailto:[log in to unmask]] On Behalf Of Inge
> Sent: Friday, January 14, 2011 9:41 AM
> To: [log in to unmask]
> Subject: Re: [TN] a different Friday quiz
>
> Yes, I know that, have been analyzing a lot during the years, but this
> seems
> a little different. Note: 1. the unit has never been exposed to any
> other
> environment than inhouse atmosphere.
> 2. The screw is not in contact with anything else than copperless FR-4.
> 3. Only one screw has this corrosion.
>
> Inge
>
>
>
>
> ______________________________________________________________________
> This email has been scanned by the MessageLabs Email Security System.
> For more information please contact helpdesk at x2960 or [log in to unmask]
> ______________________________________________________________________
>
> ---------------------------------------------------
> Technet Mail List provided as a service by IPC using LISTSERV 15.0
> To unsubscribe, send a message to [log in to unmask] with following text in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt or (re-start) delivery of Technet send e-mail to
> [log in to unmask]: SET Technet NOMAIL or (MAIL)
> To receive ONE mailing per day of all the posts: send e-mail to
> [log in to unmask]: SET Technet Digest
> Search the archives of previous posts at: http://listserv.ipc.org/archives
> Please visit IPC web site
> http://www.ipc.org/ContentPage.aspx?Pageid=E-mail-Forums for additional
> information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100
> ext.2815
> -----------------------------------------------------
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/ContentPage.aspx?Pageid=E-mail-Forums for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
