Yes it is very good stuff and I have used it in high voltage situations.
I am just wondering though about the requirement, maybe it is to do with
friction rubbing of the kapton tape by the leads that is a concern.
For instance if you stick the kapton on the metal cover the leads could
abrade the Kapton?
If this is the case you could stick kapton on the shield and kapton across
the terminations. In this case you would get a low friction kapton to kapton
non abrading situation .
Just a thought.
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Stadem, Richard D.
Sent: Wednesday, November 03, 2010 10:57 AM
To: [log in to unmask]
Subject: Re: [TN] SEEKING A VERY THIN INSULATING MATERIALS
That would be Glyptal. http://www.glyptal.com/.
Been using this stuff for more than 35 years. Good stuff.
-----Original Message-----
From: Bob Landman [mailto:[log in to unmask]]
Sent: Wednesday, November 03, 2010 12:43 PM
To: 'TechNet E-Mail Forum'; Stadem, Richard D.
Subject: RE: [TN] SEEKING A VERY THIN INSULATING MATERIALS
Try red insulating varnish ? http://www.mgchemicals.com/products/4228.html
Dielectric Strength (dry): 3000 V / mil
* Protect motor windings, small dry type transformers, and coils from
arcing, discharge and oxidation
* Class F thermal protection (20,000 @ 150°C)
* High dielectric strength
"glyp it then ship it"
Try this source for insulating materials
http://www.erbaisolanti.com//prodotti/23/0/ing/electro-insulating-varnishes-
and-resins-for-windings.html
Bob Landman
H&L Instruments, LLC
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Stadem, Richard D.
Sent: Tuesday, November 02, 2010 9:18 AM
To: [log in to unmask]
Subject: Re: [TN] SEEKING A VERY THIN INSULATING MATERIALS
Coat the pins with a hard epoxy coat. Or you can bond a 2 mil sheet of FR-4
over the leads.
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Roberts, Jon (SA-1)
Sent: Monday, November 01, 2010 4:30 PM
To: [log in to unmask]
Subject: [TN] SEEKING A VERY THIN INSULATING MATERIALS
Hopefully, some of you have experience during design where the connector
lead protrusion is long enough to touch a metal cover. The lead protrusion
is very slight but it the cover just sit very close at the one end. Kapton
type tape does not provide sufficient protection. Is there any other
material that is thin but more resilient and has
insulation properties? The assembly will not be coated. This
assembly goes into to test station that will be used by our customer.
Thanks in advance. Jon
This communication is intended only for use by the addressee(s) named herein
and may contain business confidential and/or legally privileged information.
If you are not the intended recipient of this e-mail, you are hereby
notified that any dissemination, distribution, disclosure or copying of this
e-mail and its contents is strictly prohibited. If you have received this
e-mail in error, kindly notify the sender by replying to this message. In
addition, please permanently delete the message and any attachments without
copying or disclosing the contents. Thank you for your cooperation.
THIS DOCUMENT AND/OR SHIPMENT MAY CONTAIN COMMODITY ITEMS, SOFTWARE OR
TECHNICAL DATA THAT IS CONTROLLED BY U.S. EXPORT LAW, AND MAY NOT BE
EXPORTED OUTSIDE THE UNITED STATES OR TO NON U.S. PERSONS WITHOUT THE
APPROPRIATE EXPORT LICENSE FROM EITHER THE U.S. DEPARTMENT OF STATE OR
DEPARTMENT OF COMMERCE.
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0 To
unsubscribe, send a message to [log in to unmask] with following text in the
BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or
(re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet
NOMAIL or (MAIL) To receive ONE mailing per day of all the posts: send
e-mail to [log in to unmask]: SET Technet Digest Search the archives of
previous posts at: http://listserv.ipc.org/archives Please visit IPC web
site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100
ext.2815
-----------------------------------------------------
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0 To
unsubscribe, send a message to [log in to unmask] with following text in the
BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or
(re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet
NOMAIL or (MAIL) To receive ONE mailing per day of all the posts: send
e-mail to [log in to unmask]: SET Technet Digest Search the archives of
previous posts at: http://listserv.ipc.org/archives Please visit IPC web
site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100
ext.2815
-----------------------------------------------------
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
