TECHNET Archives

November 2010

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
"Brown, Elaine" <[log in to unmask]>
Reply To:
TechNet E-Mail Forum <[log in to unmask]>, Brown, Elaine
Date:
Tue, 16 Nov 2010 12:50:33 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (55 lines)
The scope of this method :
This test method defines the procedure for determining
the adhesion of solder resists (masks) used over melting
metals, (such as solder plated and reflowed solder printed
boards both prior to and after soldering), nonmelting metals,
and printed board substrates.

Says that the test is used before and after solder for only melting metals.

Yet on page 2

5.1.4 Testing is to be conducted on specimens before and
after soldering in accordance with J-STD-003, Methods A, B,
C, or D with no accelerated aging.
 It says that you test a G coupon before, cut it out and do solderability testing on it and test it again.


Are most people doing a before and after with SMOBC?
If you are and are using a G coupon cut, fluxed and solder floated in accordance with J-STD-003,method C do you have to fixture the
coupon to pull it? or just hold down the edges?

What do you do if you use a production PB?  Do you use it for solderability testing and adhesion test it before and after and then scrap the part?


Thanks in advance

Elaine




Elaine Brown
PWB Quality Engineering
Lockheed Martin Systems Integration - Owego
1801 State Route 17C  MD0409
Owego, NY  13827
Phone:  607-751-2015   FAX: 607-751-7796
e-mail:  [log in to unmask]


______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask] 
______________________________________________________________________

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

ATOM RSS1 RSS2