Subject: | |
From: | |
Reply To: | |
Date: | Tue, 30 Nov 2010 10:44:17 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
When I was suffering through an ERP implementation I found good information
at APICS.ORG
http://www.apics.org/Resources/Links/
The short answer is yes, part of the structured BOM might distinguish
between SMT and Through Hole parts and it might be available as a report as
two separate parts lists with costs.
I would expect that it would be possible to report the BOM for the board
assembly as a sub assembly of the board in a chassis.
Guy
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Smith, Rick
Sent: Tuesday, November 30, 2010 10:30 AM
To: [log in to unmask]
Subject: [TN] Separate BOM's for Same Assembly
Hi Folks,
Engineering currently produces two separate BOM's for a single board
assembly, 1 for SMD's and the other for PTH parts which are subsequently
entered into the ERP system by Doc Control. Without going into a lot of
detail I understand the reasons for the separate BOM's are related to
production logistics, routings and cost.
I am told this is typical in the industry for OEM's and would like to either
corroborate or debunk this with your responses. I am trying to determine if
the 2 BOM system is necessitated by ERP limitations or the result of a
misguided approach to process development.
Does anyone use the two BOM approach for a single board assembly?
Thanks!
Regards,
Rick
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
|
|