I'm a new member and hope that this is the correct forum for questions.  My question is related to IPC J-STD-001E, Section 4.18.2, Solder Connection Defects.  In particular, I would like to know how Item "f." is to be interpreted (See reference below).  Is the intent of item "f."  to,


1)      allow a solder connection within the confines of the solder pads and connecting solder path as the design allows,
or

2)      does it allow solder "bridging" outside the solder boundaries (solder pads and connecting solder path) and solder is allowed to come in contact with the circuit board.

[cid:[log in to unmask]]

It appears that item "f." was not part of the standard in Revision B, but was added to the standard in Revision C.  With that said, I'm hopeful that someone in this forum can shed some light on the original intent of Item "f."

Thanks,
Wayne


______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask] 
______________________________________________________________________

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------