TECHNET Archives

September 2010

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Lum Wee Mei <[log in to unmask]>
Reply To:
TechNet E-Mail Forum <[log in to unmask]>, Lum Wee Mei <[log in to unmask]>
Date:
Fri, 17 Sep 2010 20:07:22 +0800
Content-Type:
text/plain
Parts/Attachments:
text/plain (26 lines)
Dear All,
 
During PCBA inspection, we noticed cracked line across the entire IC lead width at the knee location. It happen to the whole row on one side of the IC and we consider it a reject. However, our production subcontractor do not concur the component as reject. They said that the crack is only fine line and is unlikely to cause any major physical issue to the leads itself.
 
In another IC, we noticed a small area of oxidation on one of the lead of about 1 - 1.5mm in size. Again the subcontractor do not accept our decision that it is a reject. The reason given by them is that although the corrosion exposed the base metal it is acceptable because the exposed surface is not part of the required solder fillet.
 
I have tried to upload the photo on IPC Technet but not successfully. Hope from your experience, you can provide some opinions.
 
Thanks and Regards,
~ Wee Mei ~

______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask] 
______________________________________________________________________

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

ATOM RSS1 RSS2