Richard,
Can not recommend a specific supplier either, however would recommend that
you diamond saw the boards to singulate rather than score and break, etc.
Most hybrid mfrs that deal with ceramics, or dicing of wafers can easily saw
generic laminates, leaving the module with mirror smooth edges and little
tearing, smearing of the castellation metallization. Amounts to selection
of blade, feed and speed. Have diced boards ranging from 0.010-0.062" thick
using this method.
Since your have a single-sided board, one would just attach the board to a
sacrificial plate [glass for example] with a water soluble wax after
assembly. Problems will surface if the board is warped, or tall components
are near the edges where the hub of the dicing blade may hit.
Getting the board is the easy task. Am sure that you can find a facility
somewhere nearby that can dice them for you...
Steve Creswick
http://www.linkedin.com/in/stevencreswick
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Richard Hatano
Sent: Tuesday, September 07, 2010 1:57 PM
To: [log in to unmask]
Subject: [TN] looking for castellation board vendor recommendation
Hello Everyone,
It's been a few years since I've been on TechNet, and it's good to see some
familiar names. I hope you're all doing well in these difficult times.
I know my question begs more questions, but I would like to hopefully keep
it simple by asking if anyone can recommend a pcb fab company to get some
boards with castellated edges made.
Right now these are prototype and I don't know what the quantity will
eventually be. Other than the castellation there is nothing strange about
them. They are less than 1 sq. in. in area, 4 layer, SMD one side, 6/6 mil
trace/space, 14 mil via. Having thinner boards (0.031") would be preferred
but seems to really impact cost, so it is a secondary parameter.
If anyone can reply with a recommendation it would be hugely appreciated.
Thanks,
Richard
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
