The received wisdom on having Bismuth involved in any lead to lead-free
assembly transition is that it should be avoided because of the possibility of
forming a low-melt Sn-Pb-Bi phase within the solder joint, possibily at grain
boundaries and risks realiability problems. But how likely is it that for example,
SMT AE caps RoHS-compliant from Panasonic using a SnBi termination finish
will provide the right Sn/Pb/Bi contributions to create the troublesome alloy?
I found a presentation from NEC which explains their choice of SnBi finish and
explains research they commissioned that found the low-melt phase will not
occur.
<http://www.alpha.cooksonelectronics.com/sacxdatalibrary/pdfs/NECSMT.PDF
>
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------