Thanks Fred & Andre, I appreciate your input!
Dave
At 01:43 PM 7/14/2010, you wrote:
> Hi Dave, AT&S - Tell Wolf Hello...!
>
>Wolfram Zotter
>Head Sales Engineering Americas LLC
>________________________________
>AT&S Americas LLC
>2880 Zanker Road, Suite 203, 95134 San Jose
>Phone: 408.449.4576
>Fax: 408.432.7235
>
>
>Regard's, Frederick Dark Jr.
>Manager Senior PCB Designer
>Crestron Electronics, Inc.
>22 Link Drive Rockleigh N.J. 07647
>P:201.750.7004 ext.11320
>F:210.767.5772
>[log in to unmask]
>
>
>-----Original Message-----
>From: DesignerCouncil
>[mailto:[log in to unmask]] On Behalf Of Andre Demers
>Sent: Wednesday, July 14, 2010 4:40 PM
>To: [log in to unmask]
>Subject: Re: [DC] Looking for High Tech Board Shop - Chip-On-Board
>
>Hi Dave,
>
>I'm not sure, but I think that FTG or Coretec in
>Toronto have the capability to do what you need.
>But where ever you end up getting the board
>made, expect to pay through the nose for the fab !
>
>Good Luck.
>
>Andre Demers C.I.D. +
>Senior PCB Designer
>
>cmrsummit Technologies
>310-733 boulevard St-Joseph
>Gatineau (Québec) J8Y 4B6
>Canada
>
>Telephone: 819.205.1185
>Toll Free: 877.428.1229
>Cell: 613.293.9723
>
>[log in to unmask]
>www.cmrsummit.com
>
>
>
>-----Original Message-----
>From: DesignerCouncil
>[mailto:[log in to unmask]] On Behalf Of David Baldwin
>Sent: Wednesday, July 14, 2010 4:35 PM
>To: [log in to unmask]
>Subject: [DC] Looking for High Tech Board Shop - Chip-On-Board
>
>DC Members:
>
>I am looking for a high tech board shop that can manufacture a very tight PCB.
>
>I am designing a PCB that has a Chip-On-Board. It has 568 pads, all
>jammed on two sides. These all need to be wire bonded to the PCB
>onto a 3-row configuration. It's far from ideal, but it is what I
>have to work with. As a result, I am using a 12 mil via with a 6 mil
>drill near the bond pads. Blind / buried vias are not practical for
>this design. I can't make this 4 rows or spread things out any
>further as we will exceed the capabilities of the wire bonder.
>
>This design has 3 mil trace / space.
>100 ohm differential pairs.
>12 layers.
>0.048" thick.
>12 mil via, 6 mil drill.
>
>Any recommendations for a board shop that can do something like this
>would be greatly appreciated.
>
>Thanks,
>
>David Baldwin
>
>
>______________________________________________________________________
>This email has been scanned by the MessageLabs Email Security System.
>For more information please contact helpdesk at x2960 or [log in to unmask]
>______________________________________________________________________
>
>---------------------------------------------------------------------------------
>DesignerCouncil Mail List provided as a free
>service by IPC using LISTSERV 1.8d
>To unsubscribe, send a message to [log in to unmask] with following text in
>the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
>To temporarily stop/(restart) delivery of
>DesignerCouncil send: SET DesignerCouncil NOMAIL/(MAIL)
>Search previous postings at: www.ipc.org >
>On-Line Resources & Databases > E-mail Archives
>Please visit IPC web site
>http://www.ipc.org/contentpage.asp?Pageid=4.3.16
>for additional information, or contact Keach
>Sasamori at [log in to unmask] or 847-615-7100 ext.2815
>---------------------------------------------------------------------------------
>
>
>
>______________________________________________________________________
>This email has been scanned by the MessageLabs Email Security System.
>For more information please contact helpdesk at x2960 or [log in to unmask]
>______________________________________________________________________
>
>---------------------------------------------------------------------------------
>DesignerCouncil Mail List provided as a free
>service by IPC using LISTSERV 1.8d
>To unsubscribe, send a message to [log in to unmask] with following text in
>the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
>To temporarily stop/(restart) delivery of
>DesignerCouncil send: SET DesignerCouncil NOMAIL/(MAIL)
>Search previous postings at: www.ipc.org >
>On-Line Resources & Databases > E-mail Archives
>Please visit IPC web site
>http://www.ipc.org/contentpage.asp?Pageid=4.3.16
>for additional information, or contact Keach
>Sasamori at [log in to unmask] or 847-615-7100 ext.2815
>---------------------------------------------------------------------------------
>
>______________________________________________________________________
>This email has been scanned by the MessageLabs Email Security System.
>For more information please contact helpdesk at x2960 or [log in to unmask]
>______________________________________________________________________
>
>---------------------------------------------------------------------------------
>DesignerCouncil Mail List provided as a free
>service by IPC using LISTSERV 1.8d
>To unsubscribe, send a message to [log in to unmask] with following text in
>the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
>To temporarily stop/(restart) delivery of
>DesignerCouncil send: SET DesignerCouncil NOMAIL/(MAIL)
>Search previous postings at: www.ipc.org >
>On-Line Resources & Databases > E-mail Archives
>Please visit IPC web site
>http://www.ipc.org/contentpage.asp?Pageid=4.3.16
>for additional information, or contact Keach
>Sasamori at [log in to unmask] or 847-615-7100 ext.2815
>---------------------------------------------------------------------------------
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
---------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To temporarily stop/(restart) delivery of DesignerCouncil send: SET DesignerCouncil NOMAIL/(MAIL)
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
---------------------------------------------------------------------------------
|
