Hi,

 I bought a magnet wire stripper from the Eraser Company

http://www.eraser.com/catalog.cgi?mode=details&product_id=2615

They have a number of different version. The L1 bench top allows you to
strip very close to the bobbin, that is a very important issue.

Bob Kondner

-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Roberts, Jon (SA-1)
Sent: Friday, June 18, 2010 10:50 AM
To: [log in to unmask]
Subject: [TN] REMOVING VARNISH ON TRANSFORMER

Have a issue with a very small transformer that the varnish is near to
impossible to remove from the end of the wire.  In the past we did not
have a problem and yes we are going to contract the manufacture but they
are closed on Fridays. 

 

The specification for the wire to be used is RM5P-CB1-6 and I have been
unable to find it searching the internet.  Some transformer the varnish
did come off with heat from a soldering iron but several were not
affected by heat.  Scrapping is not what I prefer and even when the
operator tried that it was difficult to almost impossible to remove.  

 

Question:  could it be the incorrect wire used or a defect in the
varnish applied or that process to apply the varnish?  Just picking your
brains on a Friday, Thanks for any suggestion and I will let you know
next week what we find out from the manufacture of the transformer.  Jon



This communication is intended only for use by the addressee(s) named herein
and may contain business confidential and/or legally privileged information.
If you are not the intended recipient of this e-mail, you are hereby
notified that any dissemination, distribution, disclosure or copying of this
e-mail and its contents is strictly prohibited. If you have received this
e-mail in error, kindly notify the sender by replying to this message. In
addition, please permanently delete the message and any attachments without
copying or disclosing the contents. Thank you for your cooperation.

THIS DOCUMENT AND/OR SHIPMENT MAY CONTAIN COMMODITY ITEMS, SOFTWARE OR
TECHNICAL DATA THAT IS CONTROLLED BY U.S. EXPORT LAW, AND MAY NOT BE
EXPORTED OUTSIDE THE UNITED STATES OR TO NON U.S. PERSONS WITHOUT THE
APPROPRIATE EXPORT LICENSE FROM EITHER THE U.S. DEPARTMENT OF STATE OR
DEPARTMENT OF COMMERCE.

______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask] 
______________________________________________________________________

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------


______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask] 
______________________________________________________________________

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------