Hi Paul - we are using diamond polishing solutions and SiC papers for
grinding. We process about 600 cross sections a year so the cost of the
cross-sectioning materials in such a low volume flow hasn't been an issue
for us. I know that the diamond polishing solutions can be a budgetary
issue for some laboratories. But man - the polish you get from diamond is
sooo much better than SiC.
Dave Hillman
Rockwell Collins
[log in to unmask]
Paul Edwards <[log in to unmask]>
Sent by: TechNet <[log in to unmask]>
06/11/2010 11:34 AM
Please respond to
TechNet E-Mail Forum <[log in to unmask]>; Please respond to
Paul Edwards <[log in to unmask]>
To
[log in to unmask]
cc
Subject
Re: [TN] Weird formation of voids
Just out of curiosity is every one using SiC instead of diamond for
cutting and lapping?
Paul
Paul Edwards
Surface Art Engineering
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Bev Christian
Sent: Friday, June 11, 2010 8:52 AM
To: [log in to unmask]
Subject: Re: [TN] Weird formation of voids
Steve,
Good observation! This is one of the things that lead my lab manager to
determine that the voids were an artifact of preparation and were not
caused by the solder paste and/or manufacturing process. The re-polished
samples look GREAT.
Bev
RIM
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Steve Gregory
Sent: Friday, June 11, 2010 11:47 AM
To: [log in to unmask]
Subject: Re: [TN] Weird formation of voids
Another thing that's weird, is that you see the intermetallic layer even
where the voids are...how does that happen?
Steve
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Stewart McCracken
Sent: Friday, June 11, 2010 11:36 AM
To: [log in to unmask]
Subject: Re: [TN] Weird formation of voids
Importance: High
Hi All,
Looks as though sample preparation condition is less than ideal. Sample is
a
little rounded and it appears that the voids might in fact be embedded
debris from the polishing equipment(?) I'm sure Vladimir would agree - get
it in the SEM to be sure! Need some better imaging and if possible EDS -
these will go a very long way to confirming what's going on. Lumps of
silicon carbide can really make a mess of a x-section. If you don't have
access to a SEM, you could etch the structure and look for abnormal
/unusual
structures surrounding these features. Etching would also help to refine
the
soft edges on a x-section (provide a more natural edge) and let you see if
you have shrinkage or gas voids (look at shape) filled with grinding
debris.
Contaminated mats on a polishing station could explain the pattern of
occurrence and the feature. As always though, more info about condition
would make diagnosis easier!
Kind regards,
Stewart
Stewart McCracken
MCS Ltd.
Centre House
Midlothian Innovation Centre
Roslin
Midlothian
EH25 9RE
m. +44(0)7711 541735
t. +44(0)131 440 9090
f. +44(0)131 440 9085
e. [log in to unmask]
w. www.themcsgroup.co.uk
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of stephen gregory
Sent: 11 June 2010 16:21
To: [log in to unmask]
Subject: Re: [TN] Weird formation of voids
Hi Bev!
Got your picture today, and have it posted now:
http://stevezeva.homestead.com/Bevs_Ball.jpg
Almost looks like little pieces of dross. I wonder if something is going
on
with the solder paste? Or leaded reflow profile with a lead-free BGA?
Steve
--- On Wed, 6/9/10, Bev Christian <[log in to unmask]> wrote:
From: Bev Christian <[log in to unmask]>
Subject: [TN] Weird formation of voids
To: [log in to unmask]
Date: Wednesday, June 9, 2010, 9:51 AM
TechNetters,
I am sending a picture to Steve to post. I have labs in three locations.
One of them has seen weird voids in cross-sections of BGAs while the other
two locations have not. For the lab that has seen them, the
cross-sections
were prepared by different people on different days for different
products,
using the same equipment. The voids are not in all balls cross-sectioned
but
may be only in one of two of the balls in a row of multiple solder joints
examined.
Have you seen anything like this? Do you know the root cause?
Vlad,
You know what is going on, so please don't respond.
Bev
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------
---------------------------------------------------------------------
This transmission (including any attachments) may contain confidential
information, privileged material (including material protected by the
solicitor-client or other applicable privileges), or constitute non-public
information. Any use of this information by anyone other than the intended
recipient is prohibited. If you have received this transmission in error,
please immediately reply to the sender and delete this information from
your system. Use, dissemination, distribution, or reproduction of this
transmission by unintended recipients is not authorized and may be
unlawful.
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------
=============================================================================
This email and any attachments thereto may contain private, confidential,
and
privileged material for the sole use of the intended recipient. Any
review, copying,
or distribution of this email (or any attachments thereto) by others is
strictly prohibited.
If you are not the intended recipient, please contact
[log in to unmask]
immediately and permanently delete the original and any copies of this
email and
any attachments thereto.
=============================================================================
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|