Subject: | |
From: | |
Reply To: | (Combined Forum of D-33a and 7-31a Subcommittees) |
Date: | Thu, 17 Jun 2010 18:30:27 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Need clarification on the definition of Via Structures as is relates to
Microsection Requirements.
3.6.1.5 Microsection Requirements
..... Evaluation of all applicable PTHs and vias, including
blind and buried, for all such structures found on the finished printed
board shall be inspected in the vertical cross section in accordance
with Table 4-3. ...
If a board has 1-2 lasers and 1-2-3 stacked lasers is it correct to
have 2 coupons one as 1-2 and one as 2-3. Both drill cycles and plating
cycles are represented but the 1-2-3 total via structure is not. Seems
like the 1-2 and 2-3 only is bending the intent.
Wendi
This communication is for use by the intended recipient(s) only and may contain information that is privileged, confidential, proprietary and exempt from disclosure under applicable law. You are hereby notified that any dissemination, distribution, forwarding or copying hereof is strictly prohibited without the express written consent of DDi. If you have received this communication in error or are not the intended recipient, you should destroy the message and any attachments or copies, and you are prohibited from retaining, distributing, disclosing, or using any information contained herein. Please inform us of the erroneous delivery by return e-mail. Thank you for your cooperation.
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
|
|
|