Subject: | |
From: | |
Reply To: | |
Date: | Fri, 14 May 2010 14:32:01 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Toby,
ExpressPCB will make 2.5" x 3.8" boards for $51 for 3 - for some reason you
have to buy 3. Add soldermask for $24. For small hobbyist stuff it is pretty
reasonable. Drawback is you have to use their software.
Blair
On Fri, 14 May 2010 09:53:49 -0400, Toby Carrier <[log in to unmask]>
wrote:
>John,
>
>I am not based in California, I am in Kentucky. I would be dealing with
>line/spacing of about 10mils. I am just wanting to make small to medium
>sized boards for hobbyist projects. Most of the boards would be single
>sided, maybe a few double sided.
>
>I had read about heating up the ferric acid to make the etching process
>faster, but after just coming out of a chemistry class, I didn't like the
>approach!!! If it takes 30mins, then it will have to take 30mins, I can
>wait!!!
>
>I have used a couple of previous mentioned board houses, but it cost more
>money after tooling costs to than it would have just to get a setup for
>making small boards at home. But, if I do decide to make it a professional
>grade board, then I will fork out the money and have it fabricated
>elsewhere.
>
>Thanks for all the info.
>
>Toby
>
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
|
|